Ridgid certainly allows you to have the perfection of getting your hands on the tools that you might need.
With their really wide inventory of all the different tools that you can possibly need, you will definitely be enjoying the perfection of having the right tool that you might need for any of the projects that you might have been planning for.
Not only that, but there are also tons of the latest features that are exclusive to Ridgid tools only, and these features are certainly going to enhance the overall experience for your needs, whatever they might be.
Ridgid Miter Saw Guard Problems
That is something certainly great for you to have, including the Ridgid miter saw guard. Ridgid miter saw guard allows you to have a better application since you will be able to look through the blade, and that will certainly help you to have better clarity.
Not only that, but it also has a laser-guided system that ensures you enjoy accuracy and precision that no other miter saw allows.
That is definitely something to look forward to. A few common things that you will need to know about it while you are trying to enjoy the Miter saw for any of your needs would be:
- Calibration Issues
Since the laser guide is installed inside the miter and saw and goes through the guard, the laser and guard need to be calibrated perfectly to ensure that you can get the precision and accuracy that you might have been seeking. That is why calibration holds certain importance.
Otherwise, it will cause you to have a number of problems that you wouldn’t want. Calibration can get out of order due to a number of reasons, such as the laser not being adjusted right, not having the guard installed properly, and a lot of other similar issues.
That is why you will need to ensure that you are checking on all such problems and ensure that the laser is installed in the right manner and is not loose.
After that, you need to adjust the guard right as well, which will help you to ensure that you are not having any problems with accuracy or precision.
Afterward, you need to calibrate the Miter Saw Guard properly, and that should be the best thing for you to be enjoying on the Ridgid Miter saw and enjoy the proper accuracy and precision on it.
If you’re not confident about the basic installation or need some pointers from an expert, you should try reaching out to the locals.
The experts working at the local hardware store will have you sorted, and you will not have to deal with any long-term errors.
So, instead of wasting hours on hours of your own time, it is a good idea to reach out to the experts. You might just be able to save yourself a bit of time, and fixing the unit will come pretty easily to you.
- Guard Getting Loose
Another common problem that you might have to face on the Miter Saw guard from ridged is something that you will need to be careful about is the guard getting loose.
If the guard on your miter saw gets loose, you will be having certain issues, such as too much vibration on the guard that can cause the laser guide to be disturbed as well.
Not only that, but the excessive vibrations that you can get with the loose guard on the miter saw are something you will need to be careful about.
If the guard is getting loose, you will need to fix the bolt properly. That will help you out ensure that you are getting the perfection of having the right utility on the miter saw from Ridgid and not facing any such problems that you were having earlier.
- Guard Breaking
Next, the guard can get too loose, and it will end up getting touched by the blade, and eventually, it will break down.
That is certainly something that you will need to avoid since the guard can be hard to source, and there are tons of other problems that you will be getting, including having the particles flying here and there while you are using the miter saw and more.
That is why you will need to ensure that you are not having it lost and have it properly fixed to ensure that you are not facing any such issues.
The guard will help you to avoid the bigger problems, so you need to make certain that you are keeping the guard in optimal condition and tighten it at all times to not get into any such problem in the first place.
Just be sure to go through a few installation guides before trying to install the new guard. Trying to go cheap and saving a bit on the cash will only hold you back. So, if you’re stuck in these errors and can’t seem to find the right fix, just have an expert guide you here.
There are many guides able online and you can also hire a local contractor to help you set up the unit.
You will not have to spend hours experimenting on your own that way, and seeking help from an expert will not be that bad of an idea. So, be sure to reach out when you’re stuck in these errors.
- Guard Won’t Budget
Another common issue that owners have complained about is that the guard won’t go up. While this might not seem like a serious issue, it sure is annoying, and you will not be able to get through the project.
Even when you start pushing down on the blade, the guard will remain under the blade. You will not be able to get through any material because of the guard, and the project will be halted.
Sadly, the only thing that you need to do is to reinstall the guard and make sure that the spring is connected properly.
However, before you do that, make sure to remove all power from the saw. There have been too many accidents with owners losing their fingers when trying to adjust the guard. So, if you’re in the same boat, be sure to remove all power from the unit first.
From there, you can disassemble the guard and then connect the spring attached to the guard properly. At this point, you will be able to check up on the movement from the guard. Most of the time, the guard should be able to move up and down freely.
However, if that is not the case, then you might have to loosen up the adjustment by a small margin. Just make sure to make a small adjustment, and don’t try to induce a huge change when it comes to the pressure. Otherwise, you will just set yourself up for failure down the road.
After the adjustment has been made, you can try engaging the blade one more time, and the guard should move out of the palace. If you’re lucky, all issues will be sorted right here, and you will not have to deal with more compilations down the road.
However, if you’re still stuck and don’t know how to go about making the adjustment, then leave this job to the professionals. You will not be able to fix the unit yourself, and seeking help from the official support members is not that bad of an idea.
Similarly, you also have the option of reaching out to the local technicians. They bring years if not decades of professional knowledge to the table and will make sure that you don’t have to deal with any long-term errors as far as the unit is concerned.
Wrapping Up
While there is no debate that Ridgid is one of the more reliable options on the market, issues with the miter saw guard are still persistent with this brand. Sometimes, these issues can be linked to ignoring maintenance. Other times, hardware issues with the unit can lead to these errors.
Either way, you will struggle with the Ridgid system when trying to get through these errors. It will take a bit of effort to get through these errors, and you will have to check the installation, the hardware, and the calibration of the guard to isolate most of the errors.
As long as the hardware is not damaged, you will just have to fix the installation, and you will be sorted.
However, if you’re not even sure about the hardware, then we suggest that you get help from an expert. You will not be able to fix these errors yourself and will have to rely on a professional.
Keep in mind that you can always reach out to the Ridgid official support team about these issues.
The experts working there will be more than happy to guide you along the troubleshooting journey, and you will not have to go through all of these errors on your own. So, be sure to keep all that in mind.