DeWalt is the manufacturer that you go to for any and all the needs for tools. They got the widest range of inventory across all the different tools that you are going to need for having the job done perfectly including those that you seek such as electrical work, drilling, construction, and woodwork as well. Their saws are perfectly capable of handling all such tasks and so is the Miter Saw that you can get from them. A few such things that you need to know about in order to ensure that you are getting the brakes to work, while they might be stuck are:
DeWalt Miter Saw Brake Not Working
1. Give It Some Time
A delay of 2-3 seconds is considered normal for the brakes to work and that is something that you need yourself to get used to while you are working with any such miter saw. Yet, if the DeWalt saw brakes are not working after waiting for a couple of seconds, that is definitely a point of concern for you to take care of. Be mindful that it can take a few braking cycles for the bushes to confirm the round simulator shaft and you should be checking on that to ensure that your brakes are not causing you that problem due to new bushes being installed on these.
2. Check the Wiring
The brakes are electric brakes on the DeWalt Miter saw that revere the flow of current that is going to the motor, and if the brakes are not working precisely as they should, there might be some problem with the wiring that you will need to have fixed. That is why, you will have to ensure that you are taking good care of that and not only check the wires that are installed, but you should also be checking all the connections to ensure that they are connected optimally so you don’t have to face the problem again.
3. Replace the Fuse
The next thing that you should be trying out is to look out for any blown fuse. If the fuse connected to your breaking relay has blown due to some reason, that can also be a problem for you that you wouldn’t like to have. That is why, you need to inspect the fuse carefully and if you find it to be blown or having any other similar problems, you will need to ensure that you are getting that replaced with the same type of fuse and that should be helping you out in the right manner.
4. Get it Checked
Lastly, if none of the above troubleshooting tricks have worked out for you, you will need to get it checked properly since brakes are not something that you can easily compromise upon and you will have to ensure that you are getting the Miter Saw checked with DeWalt authorized warranty center to get it fixed up properly and afterwards you are not likely to be facing any such issues that were there earlier on.