Kobalt is one cool brand that you can get your hands on for a wide range of options and tools that you can need for versatile projects. There are tons of features that you will enjoy on all the different machines and tools that you can get from Kobalt.
With all that, you also get the choice to have your hands on a wide range of products that you might need to get the job done for any project that you might have taken on.
The miter saw is one such tool that you can get, and it comes with a laser on it for accuracy. If the laser is not working, here is how you can fix it.
Kobalt Miter Saw Laser Not Working:
- Check the Wiring
The first thing that you will need to check on is the wiring. There are certain issues that you might have to face on the wiring with the miter saw laser. The wires might either be loose, not connected properly, or they can be damaged as well.
That is why you will need to ensure that you are inspecting the wiring thoroughly, and if you find any such problem with the wiring, you will need to have them replaced in order to solve the problem.
- Short Circuit
Another common reason for the laser not to work on your Kobalt miter saw could be the short circuit on your wiring, and you will have to get that fixed in the right manner as well.
That is pretty easy to take care of, and if there is any wire or connection that is not right, you will have to fix that up properly, and that will help you to get rid of all such issues like the laser not working on your miter saw.
- Laser Calibration
Laser calibration is another issue that you might have to deal with if the laser is not calibrated right, it might be pointing in some direction that could be invisible to your eyes, and that is why you will be thinking that the laser is not working at all.
The easy solution to have all such problems solved would be to ensure that you are getting the laser calibrated on your Kobalt miter saw, and that should help you in order to make it work and get the perfect accuracy that you might be seeking on it.
- Replace Laser
While the chances of the laser going bad are pretty thin, at times, you might have to deal with the issue that the laser can go bad and it would stop working.
So, if everything else checks out and you don’t have any other problems with your Kobalt Miter saw, the laser might have gone bad.
The only solution that you will have in such cases is to get the laser replaced by Kobalt, and that will allow you to enjoy the perfect experience with not only getting the problem solved but also having it working in the right manner afterward.
- No harm In Getting New Batteries
Even if you’re sure that the laser is in good shape and there is nothing wrong with the terminals, the battery might be to blame here.
So, there is no harm in checking the response by adding new batteries to the unit. It won’t be that heavy on your budget, and there is no way around this fix.
This is especially true if your unit has been sitting in the warehouse for a few months. So, if you’ve inherited the device or left it in the workshop over the winter, it is time to get one with fresh batteries.
There is nothing more that can be done here when it comes to fixing the battery.
Once the replacement is installed, you will be able to get a better response from the unit. The laser will engage as soon as you turn on the switch, and you won’t have to bother with more fixes. So, keep that in mind and use new batteries to fix this issue.
- Engage The Saw
In some models, you can’t expect the laser to engage when the saw is not running.
So, if you’re in the same situation and the laser won’t come on when the saw is off, then you have to turn it on. It might sound annoying and a bit dangerous, but you’re not left with many options at this stage.
Just make sure to clear your fingers and then start the saw. As soon as the saw is fully engaged, you will be able to get a response from the laser. So, keep that in mind and adjust the saw to get the laser working again.
If you’re not too fond of this feature, then go with a more reliable unit from Kobalt. With the newer units, you won’t have to bother with the same situation. So, keep that in mind and engage the saw to get an optimal response from the unit.
- Check The Switch
At this point, you need to check the situation of the switch as well. You won’t be able to expect any performance from the unit when the switch is not working.
So, if you’ve not been able to fix the issue after going through all of the fixes mentioned above, just get a new switch.
While it is not that rare for the switch to get damaged, you can extend the lifespan of the switch by being more mindful of its use. That way, you won’t have to get a replacement every other month, and the laser will keep working perfectly.
Just make sure to remove all power connections from the saw before you try to mess with the switch.
It won’t take you much time, and usually, it is not that hard to install the new switch on your miter saw. So, proceed with the replacement, and you won’t have to worry about a thing.
- Take Your Unit To A Repair Center
If you’re not that sold on the idea of spending hours of your time just to fix this machine, then refer to a local expert.
There is no point in spending that much time in the troubleshooting process when you have no experience. So, leave this job to the professionals.
A few bucks will save you from hours of hassle, and then you can recheck the response from the unit one more time.
It will be much easier to isolate the issue when you’re seeking help from a certified professional. So, keep that in mind if you can’t seem to get any response from the unit.
- Call Kobalt Support
The Kobalt support will help you get through the same situation if you don’t want to reach out to the local experts. It all comes down to your convenience, and you can reach out to local experts or customer care members for help.
Either way, your only focus should be on informing these individuals about relevant fixes you’ve tried so far. That will make it much easier for these people to isolate and fix the situation. So, keep that in mind when you do reach out to these professionals.
These were some of the more common fixes that will help you through these errors with the laser. Most of the time, the issue is not that serious.
However, if you’re not able to get through the fix even after trying all of these methods, then the laser is defective. You have no shot at fixing a broken laser.
The only thing you can do here is to get new batteries and a laser replacement. From here, you can check the response from the unit one more time. The warranty will also cover these issues with the laser, and you’ll surely be able to grab a fresh piece in no time.
Hopefully, you won’t have to go through any complications when it comes to the Kobalt miter saw laser not working. However, if you do, just make sure to seek professional support. These members are fully willing to guide you through any and all issues.