We can all agree on how power tools have made our lives so much easier and more convenient than before.
Today, we can use different tools to perform our daily tasks more efficiently without having to worry about anything.
However, it can be pretty overwhelming to find the right fit for your project as there are thousands upon thousands of options available in the market.
This is especially true for first-time owners as they browse through different portfolios to find a multipurpose tool that might fit their projects.
Over ninety percent of these owners rely on brands like DeWalt and Milwaukee for their weekly use.
Both of these brands have been in the market for decades and will continue to dominate the market with incredible performance, efficiency, and utility.
How to Fix Milwaukee 15 Gauge Finish Nailer Jammed?
Out of the many tools that you can use today, a nailer is used in order to help the user be able to drive nails automatically. Milwaukee is one of the popular brands that offer high-quality nailer kits.
However, certain users are experiencing difficulties with their nailers as they have mentioned facing a particular problem with the nailer.
On further inspection, we found out that their Milwaukee 15-gauge finish nailer was getting jammed. Using this article, we will be giving you all the troubleshooting steps in order to learn more about how you can fix this.
So, without wasting any time further, let’s get started!
- Try Reloading the Nails
Even though it isn’t necessary that the nails might be stuck inside your nailer, we still recommend you try reloading the nails inside the nailer. Keep in mind that you might have to use some force in order to reload the nails.
Another thing we suggest you try is to bind the nose of the tool a couple of times. Doing so should help fix the nailer in case it is just malfunctioning.
- Try Using New Batteries
Using old batteries can also cause problems with your nailer. This is why we recommend that you try installing new batteries inside the nailer.
There’s a chance that the reason why the nailer is jamming is that it isn’t getting enough power required to operate fully.
If that really is the case, replacing the batteries should most definitely help resolve the issue for good.
- Try Dry Firing the Nail Gun
The last thing that you can do in order to troubleshoot the issue is to try dry firing the nail gun. More specifically, try running the nail gun completely empty. To do this, follow these steps:
- Start by completely emptying the nail gun.
- Put in a fresh pair of batteries if you haven’t already replaced the batteries.
- Pull back the slide, which keeps the nails in one hand.
- Depress the safety nose with your other hand while making sure that your fingers are completely clear.
- Dry fire the nail gun.
This should help shoot out the piston and put it back in, which will help your gun start operating normally again.
- Check Magazine For Damage
At this point, you just need to check the magazine for damage. There might be issues with the magazine itself, and if you’re sure that the nails are not clogged up and the camber is clear, you might just need to call in for a replacement.
There are no other methods that can help you here. If you wish to try your luck, there is no harm in going through a comprehensive maintenance cycle. So, be sure to keep that in mind as you try to adjust the system.
However, if the problem persists even after you’ve cleaned up the debris and the rust, then you need to get a replacement.
Some owners try to force the magazine into shape with a screwdriver or a gouge, but that will only create more problems down the road.
You should not try to mess with the unit if you do find it to be damaged. This is especially true when you’re sitting on a valid warranty.
In most cases, you can demand a replacement here by calling the dealer. So, if the purchase was recent, just ask the dealer for a new unit. He will take charge of the situation, and you will have the new device in no time.
It all comes down to the hardware status in the end. You can’t expect any performance from the unit when it is damaged, and you will have to get a new one.
Hopefully, the warranty will cover you here, and you won’t feel the need to spend more money on the nailer.
- Get New Nails
Sometimes, it is the nails and not the nailer that is to blame in this situation. So, if you have not been able to address the issue at this point, you might just need to get new nails.
That can be a bit hard at times, but there are no other options left. All that you’re trying to do is to get new nails that’ll fit.
You can also inquire about the right type of nails from the dealer. He will point you in the right direction. Spending a few more bucks to get robust nails is usually a better idea.
Saving money here might damage the unit, and getting poor-quality nails is never a good idea.
It all comes down to how you’re planning on addressing the situation. So, be sure to reach out to the dealer, and he will guide you through the rest.
Hopefully, you will be able to find the right fit for your nailer without running into more errors.
- Ask the Milwaukee Support Team
Lastly, the official Milwaukee support is and always will be the best customer care service that you will find on the market.
This brand offers some of the best units, along with a robust customer care team that will help you get through any error with these units.
If you don’t want to go through any of the hassles above and need personalized support, just reach out to the official customer care team.
These experts will guide you through a fix while also underscoring some of the more viable troubleshooting methods.
All you have to do on your end is to reach out to these professionals with complete details of the issue.
Your focus should be on clarifying the situation and making it easier for these experts to understand the issue. From there, you will be guided accordingly through the fix.
Hopefully, there won’t be other errors that you will need to consider in this situation.
The Bottom Line:
Is your Milwaukee 15-gauge finish nailer jammed? Following the instructions mentioned in the article should help resolve the problem in a quick and efficient manner.
In case of any confusion, all you have to do is to leave down a comment below! Nine out of ten times, you can fix the issue by removing all nails from the system and then dry-firing it a few times.
That might seem like a complicated step, but it will require minimal effort on your end. All that you need to do is to remove power from the system and then rid the unit of all nails.
However, if you’re not that successful with the dry firing method and can’t seem to figure out the issue, then the nailer might be damaged.
It can be a bit hard to figure out what exactly is wrong with the nailer, and you will have to do a bit of troubleshooting to get a better grasp of the situation.
From there, you can either call the dealer or take the unit to a certified repair center. Either way, you need to leave the job to the experts when you find there to be hardware issues with the nailer.
You won’t be able to fix the device yourself, and it will keep running into the same problem.