Porter-Cable Nail guns get you perfection on all fronts since these are not only some of the fastest nail guns that you can get out there, but they are also pretty great with power and durability at the same time.
On top of that, you will be able to stick close to a reasonable budget when trying to make use of this system.
Gone are the days when you have to spend hundreds of dollars on a single toolset. Now, with the increase in competition, brands like Porter-Cable dominate the market with their robust lineup.
Everything from the handling to the control and the basic features is optimized for first-time owners. You will not be able to find a better and more controllable unit on the market.
Moreover, dealer support will cover you with the best warranty deal on the market.
Porter-Cable Nail Gun Not Shooting Nails
That makes porter cable a perfect choice for you if you are looking to get your hands on a new nail gun and you want the best tool for getting the job done.
Yet, if the porter cable nail gun is not shooting nails, here are a few things that you will have to do in order to make it work for you:
- Check the Battery
The first thing that you will need to check up on is the battery, as these nail guns require sufficient power to be working properly, and they cannot function if you don’t have the right amount of charge on your battery.
So, you will need to ensure that you are keeping the batteries charged to an optimal level, and if you are facing any such problem, you will need to get the battery charged completely before trying it out again.
That should help you out properly, and you will not have to face any such issue with the porter cable nail gun again.
It all comes down to making sure that the charging levels are optimal and that the power going into the nail gun is not interrupted. If you’ve had the nail gun for a few years now, it might be a smarter idea to get a replacement.
There is no point in trying to do the old battery work if you occasionally run into these errors. Spending a few extra bucks will serve you with years of performance.
So, be sure to get a new battery, and that will be more than enough to help you get through the fix. From there, you will not have to deal with more complications.
- Choose Right Nails
Another thing that you will particularly need to be careful about is choosing the right nails that you are using in your porter cable nail gun.
Not only does the size of the nails matter, you also need to ensure the nail material type that you might have been using in the nail gun, and once you get that figured out properly, you need to use those nails in the porter cable nail gun that you are using.
It will help you out in the right manner, and you will be able to ensure that your nail gun is firing properly without causing you any such problems as the nail gun not firing at all.
- Clear the Barrel
There are fasteners in the nail gun barrel that you need to keep clear, and they might not be cleared or tied up properly if you are getting the problem with your nail gun not shooting nails.
That is why you will need to ensure that you are taking the magazine out, disconnecting the battery, and then clearing the barrel properly to ensure that it will help you to get the job done securely.
Once you disconnect the magazine and the battery, you will be able to ensure that you are effectively clearing out the nail gun barrel and then try shooting nails with it again.
That should help you out properly, and you will not have to face any such problems again with the nail gun not firing nails.
Just ensure that you are simply getting the fasteners cleared properly in order to not have the problem again since, at times, it can get bent again, and it would be better for you to get it checked properly by the Porter Cable support department.
- Adjust Air Supply
Next, you need to focus on the air supply and make sure that it is optimal. It can sometimes be hard to manage the air supply, and you will run into these issues down the road as the pressure decreases inside the gun.
So, you will have to fix the issue with the pressure. Most of the owners like to take their units to a local repair center for this process. It is a quick task, and you don’t have to do it yourself if you’re not experienced.
So, take your unit to a local reaper center, and an expert will barely take 2 minutes to adjust the air supply.
Depending upon the model and the type of nails you’re using with the nail gun, the final pressure can vary. You will have to rely on the expert opinion here, and there is no point in guessing the situation on your own.
Hopefully, you will not have to deal with the same errors after the air pressure has been managed on your system.
- Check For Hardware Issues
At this point, there is a good chance that you’re dealing with a damaged unit. There are not that many components involved here, and you have to first check up on the power and then on the magazine.
However, if that doesn’t help you figure out the issue, then the unit itself is defective. Sometimes, the delivery process can be harsh on these tools.
Even with all of the extra padding and bubble wrap, the unit can get damaged. Sadly, there is nothing that you can do about it at this point, and you will have to get a new one.
The upside here is that the dealer will cover you with a fresh piece. All you have to do on your end is to claim the warranty and ask the dealer to provide you with a fresh piece. He will take charge of the situation and will start the verification process.
You can do your part by providing a receipt or any other valid proof of purchase to the dealer. From there, the rest is easy, and you will be given a fresh nailer in no time.
So, instead of trying to fix the nailer yourself, try contacting the official dealer about this issue.
Can’t seem to figure out the situation with Porter-Cable Nail Gun Not Shooting Nails? The list of troubleshooting methods mentioned here will provide you with more perspective on how you should deal with this situation.
Most of the time, it is just the battery, and a quick charge will do the job. However, you can limit almost all of these errors by finding proper storage for the unit.
Even the most durable tools on the market will give out when you’re not storing them properly.
So, to avoid further errors, you need to store them properly in a storage box that is dry and maintains an optimal temperature.
With that said, if you follow through with every maintenance cycle and the nails are the right type, then the issue might be with the barrel.
Sometimes, there can be a missed input, and the barrel can get clogged. You will have to clear out the barrel and open up a path for the nails.
Just make sure to remove all power and magazine from the nailer before you try to mess with the system.
There is no point in risking injury while trying to clear up the unit. So, be careful as you try to clean up the system or change the batteries on this system.