Nail guns are one of the most commonly used tools today as they have slowly started to replace the traditional hammer.
Using a nail gun, users are allowed to drive in nails inside materials without having to use any kind of additional force.
How to Fix DeWalt Nail Gun Not Sinking Nails?
Even though these devices are focused on providing ease of use, you can oftentimes end up running into issues while trying to operate them. Likewise, the DeWalt nail gun not sinking nails is a pretty common issue that you can run into at times.
If you are also experiencing the very same issue, then this article should be quite helpful to you! Through the article, we will be giving you all the possible ways you can fix the issue for good. So, let’s not waste any time further and get right into it.
- Make Sure You Are Using the Correct Nails
One of the first reasons which could lead to you having this issue is that you are using the incorrect types of nails with the nail gun.
As there are various types of nails that you can go for, we recommend checking all of them individually. This will help ensure the correct nail which you need for the situation.
In most cases, we have seen 30-degree nails cause issues. Instead, we suggest you try using 21-degree nails as the 30-degree nails have been known to cause sinking issues.
- Change the Batteries
For people facing this particular issue, DeWalt recommends using at least a 6.0V battery with the nail gun. Keep in mind that there are plenty of nail guns that come equipped with a 4.0V battery which in terms can lead to sinking issues.
Ensure that you get yourself a 6.0V battery. However, if you are already using a 6.0V or larger battery, then move on to the next step. Just in case, try keeping the battery fully charged before you attempt to use the nail gun.
- Try Getting it Checked
If none of the above-mentioned steps seem to work for you, then it is highly likely that the nail gun is in need of maintenance.
This is why we highly recommend you try getting the whole nail gun checked, as this could filter out the exact reason behind the nails not sinking.
- There Is No Harm In Servicing The Machine
While you wait for an official response, there is no harm in trying to service the machine. All you need to focus on is removing the clogged debris and gunk from the unit. From there, it is not that hard to manage your system.
So, proceed with the servicing requirements and then re-test the system. You can either use an air blower or a fresh cloth to get rid of the gunk. Just make sure to get rid of the batteries before you mess with the cleaning requirements.
You will only be putting yourself at risk if the batteries are not removed from the machine.
So, for your safety, try and remove all the power connections from your device. After that, there is no harm in testing out the cleaning cycle brought forward by your device.
- The Issue Might Be With Your Magazine
The problem here might just be with the magazine, and it can often get jammed.
So, if you’ve yet to isolate the problem, just check the condition of the magazine. Once again, make sure to turn off the power as you try to narrow down the problem.
From there, just get all the nails in their proper orientation. That would be enough to help you fix the situation with the DeWalt nail gun not turning on. Hopefully, you won’t have to worry about a thing after this stage.
- Adjust Depth Wheel
At this stage, you need to also adjust the depth wheel according to the type of nails you’re using. If the depth is not managed accordingly, you won’t get any response from the drill.
So, keep that in mind if you are not able to sink your nails properly.
The manual contains complete instructions on how you can best manage the depth wheel. However, it would be better if you could seek help from an expert. They will guide you on how to best use the nail gun.
Moreover, you will get some great tips on maximizing the efficiency of your unit. So, reach out to your local experts, and they will guide you accordingly on how to best manage the depth wheel.
- Claim Warranty
If the issue is not fixed at this point, you’re just dealing with a defective device.
While it is not that common for the unit to have defects, it is possible that your device got damaged in delivery. You’re not liable for any of these damages. So, reach out to the dealer.
You just have to explain this situation and provide proof to get a replacement. Almost all of the certified DeWalt dealers will help you secure a new piece in no time.
So, keep that in mind and don’t waste more of your time. All your focus should be on getting a fresh piece.
Is Dewalt Nail Gun Reliable?
It can be incredibly annoying to deal with a faulty unit. Many users ask themselves whether or not the DeWalt nail gun is worth the purchase. So, if you’re unsure about the purchase as well, then we have the answer for you.
To put it plainly, the DeWalt nail gun is more than perfect for most homeowners. As long as you keep the nail gun in good shape, it will last you for years.
Moreover, the handling and usability are suitable for beginners. So, if you don’t know much about power tools, DeWalt is the brand for you.
There is no point in exploring other options most of the time. The pricing on this brand is also suitable. Moreover, you will be able to enjoy consistent support from the dealer.
So, yes! You should purchase this unit for your DIY projects. Hopefully, you won’t have to deal with jamming issues.
How To Keep Your Nail Gun In Good Shape?
Keeping your power tools in perfect condition is not always the easiest. However, you’re not left with many options if you want to enjoy a consistent performance from your devices.
So, it will always serve you well to keep track of unit maintenance.
You need to keep track of two main things. First, the storage of the device, and second, the cleanliness of the unit.
Just make sure to clean out the gunk after every project and then store the device in a dry spot. From there, you won’t have to worry about anything.
However, if you like to use the device for extended hours, then it is a good idea to keep track of unit maintenance.
It takes a few minutes for the device to cool down, and managing the temperature will keep your unit in perfect condition for years.
So, if you don’t want to purchase new power tools each year, keep these pointers in your mind. You will be more than happy with the results brought forward by the unit.
Are There Any Better Alternatives?
Many owners like to point out Milwaukee systems to be on the same level, if not better, than the DeWalt nail gun. So, if you can’t find a reliable dealer for your DeWalt system, there is no harm in going with Milwaukee.
It all comes down to the requirements of your project and the availability of the dealer. So, if you are struggling to find the right fit for your home, go with either one of these brands.
Ideally, you won’t have to worry about a thing when dealing with these units.
However, if, for some reason, you do run into some issues, then claiming the warranty is your best move. Hopefully, you will have an amazing time with these machines.
The Bottom Line:
DeWalt nails not sinking is a pretty annoying issue that you can come across. If you do, following the instructions mentioned in the article should help you get the issue resolved.
Make sure that you give the whole article a thorough read in order to learn more about the troubleshooting procedure.