Most people own hand or power tools as these are a part of our daily lives. These help people in performing tasks that are otherwise impossible or quite difficult. Talking about this, you should note that there are tons of tools that you can get.
Additionally, the numerous companies manufacturing these products can confuse the user.
This is why it is recommended that you go through the specifications for these to find tools that will work best for you. DeWalt is among one of the best companies that manufacture these products.
The DCF887 is an impact driver that is used by people all around the world. This device is used to loosen screws that were either stuck or frozen by using a sudden thrust and force.
Considering this, the nuts or screws can easily be removed without having to damage the product or device they were stuck in.
While these impact drivers can be amazing to use, you should note that there are some issues with them as well.
This is why we will be using this article to provide you with a list of common problems that can be found on the DeWalt DCF887, along with ways to fix them.
DeWalt DCF887 Common Problems
- Device Not Switching On
The most common issue that people report getting on their DeWalt DCF887 is that the device is not switching on. This can be quite annoying to deal with as you are unable to use your device.
Although, with this being said, you should note that the most common reason for this problem can be your batteries.
The first thing that you have to check is that these are charged properly. Sometimes people might report that their impact driver is not running at the max speed.
All of these issues usually indicate that the battery has either run out or it is running low on power. Although, if you have already checked the batteries and it is completely charged. Then there is a chance that the batteries on your device might have become faulty.
In this case, the user will have to order a new battery and replace it with their faulty one. Keep in mind that the battery you purchase should be supported by the DeWalt DCF887 impact driver.
Another reason for this issue can be that the charger for your device is broken. You should easily be able to notice this, as the battery on your impact driver will not charge if the charger has some issue.
You can test the charger using a voltmeter to confirm if it has some issue or not. If it does, then order a new one from DeWalt’s website or visit a store that might have these available.
- Overheating Issues
It is also not uncommon for the unit to start heating up as you’re trying to get through a project. While it might seem like a basic fault in the unit, this is usually caused by ignored maintenance.
If you’ve not given any mind to the maintenance of this unit in the past couple of weeks, then you might be in the same boat.
Even if you’re storing the wrench perfectly, you have to make sure that there is no dust or grime that can impact the performance of this machine. Otherwise, you will run into overheating issues without putting any excessive load on the system.
So, all that you need to do on your end is to check up on the maintenance cycle. Sometimes, all you’ll need to do is to blat the unit with compressed air, and that will get rid of the grime. Hopefully, that will be it, as you’re trying to adjust to the situation.
Next, you need to also check up on the project at hand. There is no harm in taking a few breaks in the middle and letting the machine cool down.
Being too harsh on the tools will only lead to more complications as you struggle to get a response out of the unit. So, be sure to keep that in mind as well.
- The Battery Won’t Charge
Another annoying thing that you need to track here is the battery status. There have been a few concerns where owners were struggling to charge the battery, and you might have to deal with the same errors. However, fixing these issues is usually not that hard.
You need to start by checking up on the charger and the power supply. Make sure that the voltage from the main source is optimal and that there are no issues with the power supply. From there, you can check the adjustment of the battery on the charger.
Ideally, you will be able to limit these issues right here. However, if the battery seems to be fully discharged, then you will have to jump the battery. That can only be achieved by connecting the unit to a charged battery.
So, grab a pair of wires and connect the dead battery with the charged one. From there, you can leave them connected for about 20 minutes and then check the response from the charger.
If the battery still doesn’t work, then it is defective, and you need a new one.
- Indicators Not Working
Some owners have also pointed out issues with the LED indicator not working properly on this unit. Now, there can be many issues at play here, but you need to focus more on the loose connection points and the wiring side of things.
So, be sure to check the connections and make sure that the motor assembly is in place.
From there, you can also check for damaged wires and replace them accordingly. There are no quick methods that can help you patch up the wires, and replacing them is the only real option.
From there, you can also rely on a multimeter to check up on the damaged wiring. Hopefully, that will give you more perspective on the situation, and you will not have to struggle on your own.
- Buttons Getting Stuck
Sometimes, you will also come across situations where the trigger will get stuck, and you will not be able to get any response out of the unit.
This situation can also be linked to the ignored maintenance or storage of the unit. So, be sure to keep that in mind as you’re trying to adjust the unit.
From there, you can also take a peek at the hardware side of things and make sure that the button itself or the switch assembly is not damaged.
First, you can try to quickly clean around the trigger to check up on the response. If you’re not able to get any favorable results, then the only thing that is left to do is to install a new switch assembly.
That will give you a much better perspective on the situation as you try to fix up the system.
- Bit Not Secured
Next, there have also been a few concerns about the bit not being secured properly. This situation is more related to the chuck, and you might be dealing with a damaged component here.
The only solid fix here is to get a new chuck or check the bit for damage. If you can’t find any damage on the bit and you’re installing it properly, then the chuck should be replaced.
There are no other methods of going about the replacement, and you should reach out to the dealer.
- Impact Driver Switching Between Speeds
Another problem that people have reported getting on their impact driver is that it starts switching between speeds on its own.
This can be quite frustrating as you can get this issue while you are removing a screw. Although, you should note that this problem usually indicates that there is some issue with the motor of your device.
One easy fix that you can try is lubricating the motor on your impact driver. Keep in mind that you should only use a small quantity of lubricant to avoid damaging the product.
This should mostly help in fixing this issue, but if even this does not work, then the motor on your drill might be damaged.
- Faulty Device
Finally, if you have tried the steps mentioned above but your DeWalt DCF887 is still running into problems. Then you can try opening it up to look for any broken parts.
Although, this process will take a lot of time, and it will also void the warranty for your impact driver. This is why a better solution is that you contact the support team for DeWalt and tell them about your problem.
They will ask for some details so that the main reason for your issue can be found. Once this is done, the brand should be able to provide you with a solution that can be used.
In most cases, if your device is faulty, then the company will send you a replacement unit. However, you should first go through the guidelines of DeWalt’s warranty service to understand how it works.