6 Reasons For Craftsman Table Saw Motor Problems

craftsman table saw motor problems
craftsman table saw motor problems

Craftsman is the brand that you go for if you are looking for durability and affordability at the same time, with a number of tools that you could possibly want to have. 

Not only are they manufacture some of the most durable and reliable tools out there, but you will also be getting a certain edge of perfection with all these tools.

These tools are designed to give you the right liberty that you require to be a bit more creative with any sort of work or some project.

That is all perfectly great, and you will definitely be enjoying the Craftsman Table saw as well.

It is not only one of the most durable tables saws out there with all the right features that you could possibly need, but it also gets you the right perfection in terms of creativity. 

Craftsman Table Saw Motor Problems

However, there has been a lot of chatter going on related to the motor that you get on the Craftsman Table Saw.

You need to make sure that you are conducting the due research and ensuring that you are not having any problems while you are using it on the job.

A few such problems with the Craftsman Table Saw Motor that you might have to face are:

  1. Overheating

You get induction motors on the Craftsman Table Saw that is designed to be highly efficient since they can produce more power and consume less electricity. 


Not only that, but the power delivery rate is also pretty cool, and you will never find the table saw lagging at any point when it comes to power.

That can make you want to end the work faster, and you might end up running the motor for longer periods.

The induction motors are known to produce a substantial amount of heat, and you will definitely need to be careful about that as well.

While you are not going to have any issues at all with the power delivery on the Craftsman Table Saw problem, it can get heated up if you use it continuously for hours.


You should be giving it some downtime between the intervals that you use it to ensure that your motor on the table saw doesn’t heat up.

Motor heating up will not only cause you to have a certain inconvenience, but it can also be a reason to have your motor damaged permanently, and replacing the motor will be a costly repair for your table saw to have.

  1. Getting Stuck

While you are working with the induction motors, you will need to know that they can get stuck as well since the mechanism on these motors is designed to have an airflow system to keep the motor cool while you are using it.

stuck word

Those air vents can also be the reason to have sawdust and other particles getting inside the motor and eventually causing it to get stuck.

To avoid having that problem in the first place, you will need to ensure that you are cleaning the motor regularly and keeping it away from moisture.

However, if you are facing any such problem on the motor and it gets stuck, it would be better to have it cleaned up properly with an authorized technician from Craftsman.

That would help you out properly to get rid of the problem without doing any further damage to the motor.

  1. Excessive Noise

noise pollution

Another common problem that you might have to deal with is the excessive noise on the motor, and you might feel like it is taking a bit of load and running heavy.

That is why you will have to make sure that you are getting the problem solved properly.

The noise is caused due to excessive friction that might be caused by the gunk or dust getting stuck in the motor.

You need to ensure that you are cleaning not only the motor but the rotors on it as well, and it would be better if you could also lubricate the rotors to ensure that they are not generating any more friction than is necessary.

Proper cleaning and lubrication should lower the noise levels that you get on your Craftsman Table Saw Motor.

  1. Breaker Tripping

Next, you might also come across situations with the breaker tripping after every few seconds.

This situation can be more annoying than you think, and you will not be able to get through the project. So, if you’re in the same boat, be sure to check up on the hardware.

There might be issues with the internal short, and you have to check on the wiring side of things to isolate the issue.

This is especially true when you’re not that sure about the maintenance cycle and the unit was not stored properly. So, be sure to check up on the maintenance side of things.

All that you’re trying to do here is make sure that there is no extra load on the motor, the wiring is in good shape, and the unit is clean.


That will usually be enough to help you get the ideal response out of the motor. Hopefully, you will be sorted at this point, and you can go about using the motor accordingly.

However, if you’re in a situation with smoke coming out of the motor and you’re not able to get any response, then your motor might be cooked.

There is not much that you can do about the cooked motor, and you will have to replace it accordingly. Be sure to also involve the dealer, and you will not have to try and fix the problem yourself. 

  1. Decreased Power


Sometimes, the issue is with the decreased motor performance, and you will struggle to get the desired efficiency out of the unit.

Now, there might be a ton of situations at play here, and you will have to go about isolating and fixing these issues accordingly.

First, you need to check on the power status and make sure that the voltage from the main system is optimal.

From there, you can go about checking up on the condition of the blade and replace the blade if it is worn out.


Next, you need to also blast away the gunk and the debris from the unit and make sure that there is nothing clogging up the system. That will usually be enough to help you get back the desired efficiency.

It all comes down to how you’re planning on going about maintaining proper power and the movement of the blades.

So, be sure to proceed with those pointers in mind when you can’t seem to figure out the situation. 

  1. Motor Won’t Engage

Lastly, you might just come across situations where the motor will not engage.

While the majority of issues listed above underscore situations with poor performance, this problem can be more serious. This is especially true if you put your unit under excessive load every time.

So, if you are not getting any response from the motor and it will not engage the blades, you will have to do a bit of troubleshooting on your end.

This includes checking the power supply before doing anything else. All you have to do here is make sure that the power going into the unit is optimal and that there are no issues with the source.

From there, you can check the wear on the wiring and also adjust the blades. Ideally, you should be able to get a response from the motor at this point.

ask the expert

However, if you’re not that lucky and still stuck in the same situation, then you will need to get support from an expert.

There is a good chance that your unit is defective, and there is not much that you can do on your end when it comes to fixing the motor.

Hopefully, you will have a clearer idea of how to adjust the system at this point and won’t have to deal with any complications on your end.  

Wrapping Up 

problem solving

These were some of the more common issues with the Craftsman table saw motor that you will experience.

Now, the majority of these issues are not that difficult to fix and only require a minimal amount of effort on your end.

However, you will only complicate the situation more when you’re not keeping track of the maintenance.

While missing one or two maintenance cycles is not that big of a deal, you will not get any performance from the system if you keep missing on the maintenance side of things for months on end.


So, if you’re stuck in the same situation and can’t seem to figure out the issue, just be mindful of the maintenance cycle.

There are no extra steps here, and you need to keep the unit clean and stored properly.

That will help you avoid the majority of issues with the motor, and limiting the load on the unit is also better.

So, be sure to keep track of some of these pointers and you will be able to get a decent enough response from the unit. 

Leave a Comment