Ridgid is not only great with manufacturing some of the best handheld tools that you can easily use for a wide range of applications for commercial and construction sites, but you can also get some industrial level tools and equipment from them at the same time that will help you out properly in order to have the perfection on the tools and with all that in the perspective, you will definitely be enjoying an overall seamless experience if you have chosen the right tool that suits your needs best.
Among the really wide inventory that you get to enjoy from Ridgid, the Ridgid table saw is a great tool to help you with heavy-duty cutting applications and you can cut down bigger pieces of wood, plastic, or even metal pipes pretty conveniently and a lot faster with the Ridgid Table saw. Moving forward, you will also be enjoying better power on it all thanks to the motor that you get on the Ridgid Table Saw. The motor is certainly great, but it needs to be taken care of as well, and a few common problems that you might have to face with the Ridgid Table Saw Motor are:
Ridgid Table Saw Motor Problems
1. Not Turning On
The most common problem that you might have to face on the Ridgid Table Saw motor is that you will see the current is fine and the rest of the components are getting power, but the motor will refuse to turn on. That is an issue that will cause you to have certain inconveniences with the working experience you might be having and is definitely going to be a hindrance for you since you will have downtime for the work that you have at your hand and you will have to get the problem fixed for sure.
To make it certain that you are having the problem fixed up properly, you will need to ensure that you are checking on all the cables and make sure that the cables connecting to the motor are properly connected and not causing you to have any problems at all. If the cables are all fine, there might be some other issue such as voltage fluctuation that could be the reason behind this problem and powering up the motor on the wall outlet that is having proper voltages, or using a voltage stabilizer with the Ridgid Table Saw should be the best thing for you to have in order to have all such problems fixed in the right manner.
2. Having Vibrations
At times you might feel like the motor has too much vibration and that needs to be fixed efficiently as well since not only it will be causing certain noise, but also will be a big problem for the accuracy. That is why you will have to fix it up properly and that will be the best thing for you to help you out.
That is why to start with the diagnosis, you have to ensure that you are checking on the mounts on your table saw motor and check for the rubber health properly. That should be helping you out in the right manner and not only that but replacing the rubbers if they are too hard or broken should be helping you out in the right manner. The mounts should make it certain that you are not having any vibrations, and if there are no mounts, you will need to make sure that the bolts are properly tied up and not loose.
3. Not Running Properly
Lastly, the motor might not be running properly and that is another problem that you will have to face since the blade will not be rotating in the right manner and that will affect your efficiency and accuracy at the same time.
However, the solution is pretty simple and it might be caused due to improper power supply or it might be due to excessive friction. You will need to make sure that the wires are properly connected and afterward, you need to lubricate the motor as well. That should be helping you out properly and that should be the best thing for you to get the problems fixed up.