RIDGID is one of the most popular and highly appreciated brands of different tool manufacturers in the US.
They are certainly great with their batteries that allow you to get the work done remotely without having to be worried about any sort of inconveniences or the mess of wires and cables that you might have on your hands otherwise.
That certainly makes it a perfect choice, to be having, and there are a number of different perks involved that might make you want to go for the RIDGID tools and equipment.
So, if you’re new to the mark, going with RIDGID will serve you with years of consistent performance and dealer support. Just make sure to rely on an official dealer for this unit.
However, at times you might be facing certain problems, such as the charger light might be blinking. A few ways to have the problem solved are:
How to Fix RIDGID Battery Charger Blinking?
- Check the Compatibility
Not all the chargers that you get from RIDGID are compatible with all the batteries that they might have, and that is pretty self-explanatory as well.
So, you will need to make sure that you are getting a compatible charger for your battery that is designed to ensure that you are getting the perfect charging experience with the right wattage and voltage ratings on it.
So, all you need to do is check on the compatibility, and that should help you out perfectly once you get the right charger that goes perfectly with your batteries.
You can’t really expect an incompatible system to work with the RIDGID battery charger. So, instead of blaming the charger, you need to focus more on compatibility issues.
Asking the dealer or going through the compatibility guide will be enough to help you get through these errors.
- Check the Connectivity
The charger might not be connected to the battery properly, and that is another reason that you might be having this problem with the light on your charger blinking.
So, you will need to make sure that you are keeping an eye on that. You need to make sure that the charger is connected properly to the battery terminals and not just hanging loose.
You might need to disconnect the charger from your battery and then connect it again properly, and that should be the best thing to help you get it sorted out without having any such problems with the light blinking that you might have been facing earlier.
All of your focus should be on making sure that the charger is properly engaged with the battery and that there is no gap or gunk in the contact points. The charger won’t help you with any unit when you ignore the maintenance and don’t clean up the contact points.
So, even if you’re sure that the device is in good condition, there is no harm in cleaning the terminals or the contact points. Either way, you’re trying to ensure proper power flow from the charger into the battery. That should help you eliminate these blinking errors.
- Moisture
Moisture is another common factor that can cause you to face this problem with the battery light blinking, and you will need to ensure that you are not dealing with any such things on your battery terminals.
So, you will need to remove the charger, clean up the terminals properly and then install it once again.
That should be enough to help you get rid of the problem, and after that, you are not likely to face any such problems that were there on the charger earlier, like the lights blinking on it.
On the other hand, if the situation is too serious and the charger is soaking in water, then you need to leave it out to dry for a couple of hours. Don’t try to connect this charger to a power source, just let it dry out.
If you’re lucky, it should start working after the moisture has dried out. Otherwise, you can’t do much about this situation and will have to spend more cash on getting a fresh replacement for the unit.
However, if you’re sitting on a valid warranty, there is no point in going through any one of these fixes. All you need to do is to reach out to the RIDGID dealer, and he will get you a fresh piece. From there, you need to pay more attention to the storage of this device.
- Check the Battery
Lastly, if you have checked all the above troubleshooting steps and nothing so far has worked out for you, you will need to make sure that you are checking the battery as well since the battery might have been out of order or it has served its lifespan.
Either way, you need to focus on the battery condition. Aside from the issues with a drained battery, you need to check for the temperature of the pack. If the battery is too hot or too cold, the charger won’t be able to charge it properly.
So, if you’re in the same boat as these chargers, make sure to check the temperature one more time.
Leave the unit out to cool down if it is too hot, or keep it in a warm spot if it is too cold. Your main focus here should be on limiting the temperature from this device and then reconnecting it with the charger.
On the other hand, if you’re dealing with a situation where the battery is new but drained, then jumping it might do the trick. To jump a drained battery, you need to connect a fully detained unit with a fresh piece and then recheck the response from the battery.
Hence you will see the charger light blinking. So, you should check the battery and see if it is in the right state of health. If not, you will need to connect a new battery to your charger, and that will sort it out for you.
Wrapping Up
Ideally, the issue with the charger blinking should be fixed after you service the charger and adjust the placement of the battery pack. However, if you are not too sure about the hardware status of the battery or the charger, then the fix might not be that simple.
You will have to focus more on adjusting the battery temperature and the minimum charging level on the battery before anything else. Otherwise, the charger won’t pick up the battery, and the light will keep blinking on the RIDGID system.
On the other hand, if you’re not too sure about the error and it is more related to the rough condition of the charger, we will recommend that you get a replacement.
The warranty deal will last for three years, depending upon the model you purchase. So, you can claim it during this time period.
Most of the time, the dealer will do all the verification on his end. So you don’t have to go through any hassle to get the new unit. Hopefully, the situation with the damaged charger will be fixed as soon as you get a replacement from the dealer.
Just make sure to store this charger properly and keep it from regions with high humidity. Otherwise, you won’t be able to get any long-term performance from your machines.
How do I check out the battery health?