The Hilti TE 3000 AVR is an electric jackhammer that comes with tons of features. The device delivers large amounts of power using the motor installed on it.
You can get about 45 kg of force which is a lot more when compared to previous models.
Additionally, the handling of the electric jackhammer has also been improved.
This helps in keeping a stable grip on your device while you are using it, which can be quite useful.
With that being said, you should note that there are also some problems that you can run into with this device.
Hilti TE 3000 AVR Red Light Reset
A common issue that has been reported recently is that the Hilti TE 3000 AVR is giving a red light reset.
If you are getting the same issue, then going through this article should help you in getting rid of it.
- Check Wirings
The Hilti TE 3000 AVR jackhammer requires people to keep it connected to an electrical power source at all times.
If you notice that your device is giving off the red reset light, then there might be something wrong with it.
The most common reason for this issue can be that your wirings are not properly installed.
You can tighten your connections to ensure that your jackhammer is getting the proper voltage required.
Other than this, another reason for the issue can be that the voltage in your socket is fluctuating.
This can be checked by taking readings of the current inside your socket. If you notice any problems with the outlet, then try using your device on another one. This should help you in getting rid of the issue.
- Reset The Device
If you are still getting the same issue with your electrical jackhammer, then there is a high chance that your device might be running into configurational errors.
This can be quite annoying, but you should note that the problem can be easily fixed by resetting the device.
The only thing that you have to do is hold down the reset button while your jackhammer is connected to an electrical outlet.
The device should reboot a few times, after which it should start working again without any issues.
People can also try taking off the handle from the assembly body and then installing it back in.
- Get it Serviced
Getting the unit serviced is one of the best things that you can do here. It is not that hard to isolate the issue with this system, and the Hilti TE 3000 AVR has to be serviced after every few weeks of usage.
The servicing rudiments can vary depending upon the usage, and you won’t be overwhelmed.
If you have been ignoring this servicing indicator for too long, it is not that uncommon to see erratic behavior from the device.
There is simply no point in keeping power tools when you are not planning on keeping them maintained. So, if you’re in this same boat, be sure to reach out to an expert.
All you’re trying to do here is take the unit to a local repair shop and have it serviced.
This means cleaning the different sections and lubricating the parts to ensure a seamless movement pattern.
Otherwise, the lifespan of the machine will greatly reduce, and you won’t get anywhere with the system.
So, if you’ve not been able to fix the issue up to this stage, be sure to engage an authorized repair center in your locality.
It will cost you a few bucks, but that is much better than spending hundreds of dollars on new power tools.
Hopefully, this will be it when you’re dealing with the majority of errors related to the Hilti TE 3000 AVR system.
From there, you can adjust the response from your tools accordingly and keep better track of their maintenance.
- Check for Temperature Problems
When the tool gets too cold, it will experience a massive drop in basic performance, and you won’t be able to get anywhere with the system.
If you’re in this same situation, be sure to check for temperature issues.
Most of the time, the problem is more with the temperature being too low and the unit is stored in the open.
If you’re in the same boat, try to find a better spot in the workshop for your tools. There should be proper storage boxes and optimal space for these devices.
Otherwise, you will have to service them more frequently, and they will stop responding to any input.
So, if your device is also cold, bring it inside your house and let it warm up for a few hours.
This does not mean that you bring it next to the fireplace and heat it up. Instead, you need to wait for the unit to get to room temperature near a sunny window.
From there, you can check the responsiveness of the device one more time.
Ideally, all issues should be fixed at this stage, and you won’t have to bother with any more pointers when trying to adjust your smart system.
- Make Sure Protection System Is Disabled
Sometimes, there is no real issue with the unit, and the protection features are engaged.
If you’re in the same situation and the protection features are engaged, you will have to rely on the TPS key to turn them off.
You can’t really use the tool when it is running into these issues. While the protection features are great for your safety, they have to be turned off with a TPS key before usage.
So, if you see random issues with the red light and the issue is persistent, checking the protection engagement is the next best move.
- Check Extension Cord
Here, you need to check the situation with the extension cord. When the extension cord is too long, it can create problems with the power flow to the unit, especially when you’re using a cheap extension.
So, if you’re in the same boat with the long extension cord that is not compatible, try a different one.
Sticking with expensive extensions might not seem like a good decision, but you’ll be able to get years of consistent performance with these devices.
Moreover, the responsiveness from your unit will also improve.
So, if you’re also stuck in this same issue, be sure to find a better extension that will eliminate the majority of errors that you’re dealing with.
- Customer Support Team
In some cases, the issue you are getting can be from your Hilti TE 3000 AVR being faulty.
There are tons of reasons why this can happen, and trying to figure out which part exactly is damaged can take a lot of time.
You can try consulting the manual provided along with your power tool to help you out.
Although, this takes a lot of time which is why most people prefer contacting the support team instead.
They will look into the issue and provide you with a simple solution that can be used. If any part requires replacement, then you will be asked to bring in your device for repairs.
Wrapping Up
These fixes should help you get through the situation with the Hilti TE 3000 AVR Red Light Reset.
Almost 99 percent of the time, you can get through this error by getting the unit serviced. It is simply a service indicator that will go away when you get it serviced from a local center.
However, if you can’t seem to get through the error even after going through all of these fixes, then you need to get yourself a new tool.
This tool is defective, and claiming the warranty should be your best option.
From there, you can easily make use of the new tool, and that will keep you served for years.
Hopefully, that will be it when you’re dealing with the majority of issue with Hilti TE 3000 AVR Red Light Reset.