It can seem quite daunting for customers to make the right purchase decision when it comes to buying Tire machines.
There are many brands in the market, and you have to deal with multiple tire types throughout the day.
So, you have to put a lot of thought into making the ideal purchase for your setup. A good practice to make better decisions is to refer to other experts and talk about the pros and cons of different brands.
That way, you won’t have to worry about wasting money on a poor model. So, keep that in mind and just try to provide a detailed description of your requirements.
From there, you can look up reviews on the different units recommended by the dealers.
How to Fix Coats Tire Machine Won’t Spin?
With that said, many people have recently mentioned issues with the Coats tire machine not spinning.
If you’re also in a similar situation and the Coats tire machine won’t spin, then here are a few solutions.
- Check the Motor
If the machine won’t spin as you try to operate the Coats Tire changer, then there is a good chance that your motor has gone bad.
Depending upon the age of the machine, it is not rare for customers to run into motor issues.
So, if you’ve had the machine for a long time, then it might be a good idea to start by checking the integrity of the motor.
Make sure to check for physical damages and also inspect the wiring connections.
If the motor is turning just fine with your hands and you’re hearing noise coming from the unit when you operate, then you are not dealing with power issues.
Just take the motor apart and install a replacement if the motor unit is completely worn out.
Similarly, it is not that bad of an idea to service the motor. Most people ignore the maintenance of their devices for weeks.
If you’re in the same boat, then the motor can be clogged up with debris or foreign objects. Most of the time, just using an air blower to free up the gunk with a few taps is enough.
However, if you’re unlucky and the issue is persistent, then the only thing you can do is go to a repair center.
Leave this job to the professionals, and they will know how to deal with a clogged unit
. You’ll just have to pay a minimal servicing fee, and that will be it when you’re dealing with motor issues where the Coats tire machine won’t spin.
- Check the Power Status
If the motor turns just fine when you apply force with your hand, but you’re not getting any noise from the unit, then the issue is likely with the power supply.
So, the best method here would be checking the wiring cluster as well as the connection points.
Over time, dirt and rust can damage the connection points and block the flow of power.
Here, you can rely on any cleaner from the market or create one yourself by using a diluted vinegar solution.
It all comes down to the situation with the unit, and you can go with either one of these.
Make sure to clean any corroded regions with a vinegar solution and then wipe away the gunk. You can then wait for a few moments to let the solution dry and then get rid of the residue.
This job will be better suitable for an expert, and you should avoid this method when you don’t have enough experience with electrical connections.
You might end up further damaging the connection points instead of fixing them properly.
Other than that, you should also check the integrity of the capacitor unit and replace it immediately if it is not functioning perfectly.
Hopefully, this will help you overcome spinning issues with your Coats Tire Machine.
You can’t expect the machine to work when it is running into power issues. So, to remain on the safer end, we suggest that you try calling a local expert for help.
That way, you won’t have to wait for the customer care team to respond, and the issue will be fixed right away.
- Broken Components
Many times, this issue is related to broken components inside your Coats Tire Machine.
It is true that this brand makes the most reliable tire changers, but over time many issues can present themselves because of rough usage.
So, if you’re in a similar situation and don’t know how to inspect the unit, then calling a technician is your best bet.
If the purchase of this unit was recent, then you can directly call your dealer and explain the problem to them.
That way, you won’t have to spend a dime to get your unit fixed if the warranty is still valid.
Along with that, you can try reaching out to customer support by contacting the company number. They will guide you completely about how you should be going about tackling this problem.
Either way, your warranty is valid for three years. As long as you have proof of purchase, it shouldn’t be too hard to get a new unit.
Some dealers won’t even ask you for this proof, and they will verify the purchase on their end. So you can limit the hassle when trying to verify the claim.
Once the verification is through, you will have the new unit within the same week. So, keep that in mind and try to reach out to the dealer as soon as possible.
Hopefully, you won’t have to worry about any more errors when using the new system.
Wrapping Up
These are a few methods that you can try out when the tire machine won’t spin. Almost ninety percent of the time, it is either the motor or the electrical connections.
If you can’t hear any humming noise, then it is the electrical connections that are not supplying enough power.
On the other hand, if you’re stuck with the humming noise and the motor won’t move, then it is the presence of defective components.
You can’t really make use of this unit if it is damaged, and going to an expert is the best option here.
Yes, you will have to spend a bit of cash here, but it is much better than wasting hours of your time. You won’t be able to solve the issue yourself even if you take apart the motor.
So, if the issue doesn’t get fixed after replacing the capacitor, make sure to reach out to the dealer or any local expert.
Help them understand the issue, and they will secure all the replacement parts needed for the repair. From there, you can make use of the tire changer without worrying about any further problems.
However, if you’re sitting on a valid warranty and there is nothing wrong with the unit itself, then getting a new one is not that bad of an idea.
You can reach out to the dealer with a warranty claim and proof of purchase. From there, he will help you secure a fresh piece in no time.
Ideally, you won’t have to ever worry about dealing with the same situation if you take good care of the new unit. Just make sure to service the machine at least once every month.
That will keep the gunk away from connections, and the capacitor will help you with a better lifespan.
U can hear like in the transmission part that it be trying to catch but in a certain spot it’s a grinding sound and the top part won’t turn