8 Methods To Solve Ryobi Circular Saw Blade Not Spinning

ryobi circular saw blade not spinning
ryobi circular saw blade not spinning

Working on projects requires you to have the best equipment with you. Talking about this, it is also important that you have the tools needed for the job.

When it comes to cutting through hard materials, having a circular saw with you will be a lot of help. However, numerous companies are manufacturing them.

This can confuse the user at first but selecting a good company is also important. Ryobi is among some of the best brands that are known for manufacturing some of the best tools available on the market.

Though, you should note that they also have some issues that you can run into.

The Ryobi Circular saw blade not spinning is one of the most annoying problems. This is why we will be using this article to provide you with a list of steps that can be used to fix it.

Ryobi Circular Saw Blade Not Spinning Fix:

  1. Check Connections

There are tons of models that Ryobi has come up with for circular saws. This is why you should note that each of them has its unique fixes.

Although the blade is not spinning, it can most likely be from an electrical error. Talking about this, you can start by confirming if the power cable for your circular saw was connected tightly.


Having a loose connection can easily interrupt the device from working. Aside from this, if you have a cordless model, then there is a chance that your batteries were causing this problem. You can try plugging the device directly into an outlet to confirm this.

If it starts working, then you should charge up your batteries. Finally, make sure that the problem is not from the outlet itself. Sometimes these sockets can also be faulty, in this case, trying another outlet should help you to fix the issue.

  1. Check Blade

If the blade of your circular saw stops spinning while you are trying to cut material. Then there is a high chance that you do not have a tight grip on the device. Handling the equipment with attention is necessary before you can start cutting up any materials with your blade.

Additionally, in some cases, the blade can also be damaged. This is why you must check the teeth on your blade to confirm they are sharp. If not, then it is best that you first replace the blade with a new one. Doing so should also help you in getting rid of the issue.

  1. Get A New Battery

At this point, you just need to get a new battery. Finding a replacement can be a bit hard, especially if you’re using an older unit. However, the dealer will help you find a compatible fit in all situations. So, if you can’t seem to narrow down a good option, just ask the dealer.


Your main focus should be on confirming the compatibility of the battery. There is no point in wasting your time with a battery pack that won’t support your device. So, keep that in mind and don’t only focus on the power requirement here.

Some experts also recommended that you hire an expert to help with the replacement. Messing up with the saw can raise several safety concerns. So, it is always best to keep yourself on the safer end and stick with the Ryobi unit for a better response.

  1. Make Sure Trigger Is In Good Condition

There is also a chance that you’re not dealing with any battery or motor-related issues. The trigger might just be bad and not engaging properly. So, instead of blaming the unit, you need to check the condition of the trigger one more time.

If the condition is a bit rough, then installing a replacement might be your only move. Luckily, getting a new trigger and installing a replacement is not that hard of a task. It just takes a bit of your time, and you can grab one from your dealer.

From there, you can install a replacement yourself. But we will recommend that you leave this job to a professional.

There is no point in risking your safety over the replacement of a trigger. So, make sure you keep that in mind and hire a professional for help.

  1. Check Blade Adjustment & Depth

saw blade

The blade adjustment and the depth of the unit might also be to blame here. You need to check the condition of the unit and then make sure that the blade is not too exposed.

If you find the majority of the blade to be sticking out of the unit, it might be time for a readjustment.

However, before you do that, make sure to isolate power to the unit and keep yourself away from the trigger.

You might lose a finger or even a hand when isolating the issue with the blade. So, keep that in mind and fix the adjustment of your blade when you can’t seem to get through these issues.

On the other hand, you might be running into a situation with the blade being set too deep. So, it all comes down to fixing the adjustment and then retrying the trigger.

Just make sure to remove the battery before the adjustment and then resupply power to avoid the majority of these errors.

Hopefully, you won’t have to worry about a thing after fixing the blade adjustment. You can seek further support from the dealer on how to best manage the adjustment of your unit.

  1. Check For Foreign Objects

There might also be something stuck in the unit, and you need to clean up the unit to avoid these problems. However, it is best to be safe when you’re cleaning power tools, and your first step should be to remove all power.

There is no deficiency of reports on people losing their fingers while trying to fix the saw. If you are not that sold on being a part of this statistic, you need to remove all the power connections and then touch the unit.

power strip

Your main focus should be on removing all the debris and wooden pieces around the saw.

From there, you need to slightly decrease the depth of the blade and then try using the unit. Be mindful of all the safety pointers, and then see if the saw blade is spinning on the unit. Ideally, your issue will be fixed right here.

However, if you’re not too sure about how to service your unit, make sure to take your unit to a local repair center. The experts working here will charge you a minimal fee, but you’ll surely be able to get through this error within a few minutes.

  1. The Motor Might Be Defective

You also need to check the condition of the motor. If you’re sure that all the adjustments are perfect and the saw is in good condition, the motor might be at fault.

Here the power connections can create the same issue, but if you’re sure that the battery status is optimal, then all errors point toward the motor.

To get ahead of this issue, a permanent replacement is the only logical move. While you can test around with other methods of repairing the motor, it will go bad in a few months as well.

service and repair

So, if you’re aiming for a more long-term solution, just get a new motor. That would be it when you’re dealing with motor issues. Hopefully, you won’t have to worry about the motor being defective ever again.

  1. Faulty Equipment

Finally, if you are still getting the same problem on your Ryobi circular saw, even after going through the steps mentioned above. Then there is a high chance that the device might be defective. You can try fixing this on your own, but this will void the warranty.

This is why a much better option is to contact the support team for Ryobi. They should be able to look into your issue and provide you with a solution.

If the equipment is faulty, then the brand will provide you with a replacement. Just make sure that you give them all the details about your problem.

Wrapping Up

The situation with the saw not moving is more common in situations when you miss the maintenance of the unit. So, if you’re in the same boat with a Ryobi circular saw blade not spinning, just follow through with these basic fixes.

Ideally, the issue will be fixed as soon as you clean the power connections. However, if the issue is more serious, you will have to get a fresh device. There are no other methods that can help you through fixing a defective device.

Luckily, the warranty is valid for more than 12 months on most units. So, involve the dealer, and he will guide you accordingly on how to get a replacement. 

1 thought on “8 Methods To Solve Ryobi Circular Saw Blade Not Spinning”

  1. My Ryobi cordless 7.1/4 inch circular saw blade won’t spin. It feels like it is binding when I turn it by hand. I have a lot of ryobi tools and never had a problem with any of them. The saw is only about a year old. I have changed batteries. The light comes on but the blade won’t turn. Help. Thanks


Leave a Comment