A floor Stapler or flooring nailer is the tool that you get to enjoy the perfection of having the right wooden floor for any of the applications you might be having.
These flooring staplers allow you to have the right power and accuracy that you are going to need in order to ensure that you are getting the right experience with any floor stapling experience that you could be having.
There are certainly a number of brands that are offering floor staplers, and that allows you to enjoy the liberty of picking the right floor stapler or model that you could possibly need.
Bostitch Floor Stapler is one such thing that you get to enjoy, and it has the best of both worlds that allows you to have the right power, accuracy, and the right durability at the same time.
The Bostich floor stapler is pretty great to have, and you could be getting it for any of the needs you could possibly have.
They are also some of the most durable staplers, and you will not have to face any frequent problems with the Bostitch Floor Stapler. Yet, a few of the common problems that you will have to face with the Bostitch Floor Stapler are:
Bostitch Floor Stapler Problems
- Getting Stuck
The Bostich floor stapler is something that you will love for all the different needs you could possibly have, and with the Bostitch Floor stapler, you get to enjoy the perfection of having the right frequency for the applications you could be having.
However, at times you might be facing a certain problem with the floor stapler getting stuck, and that is not something you would want to have since that will cause you to face downtime and inconvenience.
There could be several reasons for you to have this issue, and first of all, you need to check on the feeder on your stapler since the pins could be stuck in there at some wrong angle and causing you to face these issues.
If the feeder is alright, and there are no such issues that you could be facing with the feeder, you need to clear the barrel as well.
The barrel could have some rust inside, some gunk builds up, or there could be some other problem, and you will need to clean the barrel properly for your stapler to be firing the right nails that you need for floor fastening applications.
- Pressure Leaking
At times you might also be getting some issues with the air pressure on your floor stapler, and the air pressure leakage is certainly not something you would be looking to have.
If the air pressure is leaking, that could cause you to have issues with your pins not stapling in the right manner, and they could be staying halfway or not getting fired at all.
The pressure leaking is something that is mostly with the hoses and seals, and you will need to ensure that you are checking on all of them.
First of all, you will need to inspect the hoses properly to ensure that they are not damaged or have some leakage on them.
After that, you will also need to ensure that you are checking on all the seals that might be in there, and if the rubber seals are getting hard or damaged, you will need to have them replaced to avoid all such issues with leaking.
- Not Turning On
You get to choose two power options on the Bostitch floor stapler and those are with the battery, or you could power it up through your regular wall outlet. However, at times your Bostitch Floor Stapler might not be turning on at all.
You need to check on the power source first if you are getting any such issues, and with that, you will be able to make sure that you are getting the perfect power on the wall outlet or that the battery that you might be using is perfectly charged as well.
If the battery is not charged, you could be having an issue with it.
So, checking on the power source should help you out properly to ensure that you can make it work in the right manner and turn the stapler on properly.
On the other hand, if you’re sure that the power going into the system is optimal, then the issue will be with the internal wiring. Those issues can be annoying to handle in most situations, and you will have to get your hands on a fresh piece.
To do that, you will have to explain your end and forward a warranty claim. Hopefully, that will help you out as you’re trying to limit these errors with the Bostitch stapler not turning on.
- Reduced Performance
The next thing that you need to consider here is the reduced performance of the system. You will not be able to drive down the nails properly when the performance is limited.
So, if you’re in this boat as well, and the floor stapler won’t work properly, just check up on the air pressure.
The first thing that you have to check here is that the PSI settings are perfect. You will not be able to figure out a fix when the PSI settings are not managed properly. So, you might have to just call it a day and rely on the manual.
You can also reach out to the official dealer or support members for their guidance. They will help you figure out the right fix, and you will not have to hassle as much with the reduced performance.
As long as you’re sure that the system is not leaking, you’re in complete control.
You should start by checking up on the hardware side of things. Make sure that there are no damaged chunks or pieces, and then go about adjusting the configurations related to the PSI. after managing the pressure, you can use the system one more time.
One more thing to keep in mind here is that you should always keep your hand in the clear. Keeping your system in harm’s way will only hold you back, and you will not get any performance out of the unit.
So, if you’re not experienced, it will not be that bad of an idea to rely on a professional.
- Driving Blade Won’t Come Back Quickly
While the floor stapler offered by Bostitch is one of the best, it still needs proper care. You will have to keep track of the maintenance and care requirements when the driving blade won’t come back.
So, if you’re in a situation with too much friction or retracting problems, just use some lube.
All that you’re trying to do is make sure that the sections are not dry and that the unit is able to move back into place. Some owners also mention that relying on grease as lube is not that bad of an idea.
However, we will suggest that you stick with a decent lubricating oil.
Yes, you will have to spend a bit more on the lubricating oil, but the performance of the system will be much better. So, try sparing some cash when you’re aiming for the ideal performance. A bit of your time and investment will help you save your nailer.
On the other hand, if you just focus on going cheap here, the performance from the nailer will be suboptimal.
You will not be able to figure out a suitable way around the problem when the hardware is damaged, and you will have to spend money on a new system.
However, if you’re in a situation where you got a damaged unit out of the box, then you will not be liable for any of these damages. All that you will have to do is to reach out to the dealer and ask for a fresh piece.
The dealer will be more than happy to help you out as you’re stuck in these errors.
Wrapping Up
We’ve listed some of the more common problems that you might face with the Bostitch Floor Stapler. You can expect to run into these errors when you are not keeping track of the maintenance cycle.
So, be sure to spend a bit of time trying to manage the system.
There is not a single brand that can work well in harsh conditions when maintenance is ignored. You will have to be completely mindful of the lubrication and cleaning requirements.
Otherwise, you will just be stuck and won’t be able to figure out a way around these errors.
Hopefully, it will not be that much of a hassle for you when it comes to fixing the system. When you’re a bit confident about the hardware, then checking up on the lubrication needs and the PSI configurations will serve you well.
On the other hand, if the hardware is damaged, then you’re out of luck. The only fix in those situations is to reach out to the officials and have them help you out. Hopefully, they will be able to guide you better on these errors.