3 Methods For Resolving Worx Switchdriver Problems

Worx is not quite the brand that you might be looking for since they are not popular among the workers, but they are manufacturing a wide range of tools with the right edge of innovation on them. They are manufacturing trimmers, edgers, blowers, chainsaws, lawnmowers, drills, and a lot of other power tools that one might need to get the job done at their place or even at the commercial level since Worx is offering a wide range of cool and convenient features along with the best possible price tags and the right durability on them at the same time. All that is perfectly great to get your hands on the tool of your choice, but there is also a lot more that you will need to know about these.

Worx is offering one of the smartest tools that you can imagine and that would be allowing you to enjoy a far better utility and application than any other tool you might be thinking of. With all that in the perspective, Worx Switchdriver is a drill power driver in a single tool and that allows you to have the perfection of using these for any possible project that you might have been working with. With all that in the perspective, you will also need to be careful about some common problems that you could be facing, and a few of them are:

Worx Switchdriver Problems

1. Compatibility

One of the biggest issues that you will have to face if you choose to go with the Worx SwitchDriver is the compatibility and you will always be having issues with finding the right parts such as chucks and bits that would work perfectly with the tool you are using. While most of the drills have interchangeable bits and parts that you can use, the same cannot be said for the Switchdriver and that is what you need to be prepared for.

The incompatible bits and other parts will not work at all with the switch driver from Worx and not only that, but they can also create some other big problems for you if you somehow try to use them with your switch driver and that is something you will need to avoid on the switch driver. The only solution to this problem is to ensure that you always have a backup in case you lose a bit or if it gets damaged, or you need to have access to a Worx dealer to have all such parts sourced up easily so you will not have to face any such issues or problems at all.

2. Switch Getting Stuck

At times you might also be facing an issue with the rotational switch getting stuck and with that, you will not be able to switch between the drill or screwdriver effectively. That is most commonly caused due to gunk build-up on your chuck and could easily be solved. All you need to do is ensure that you are cleaning it up properly each time after you are using it before you could put the switch driver in the storage.

However, if you have this problem, a cleaning spray should be helping you out to get rid of all such issues effectively without having to worry about a single thing. Yet, at times some damage due to shock could also affect the gears inside, and then you will have no choice but to have the broken parts replaced to enjoy the perfection of usage on your Worx Switchdriver.

3. Triggers Not Working

The Worx Switchdriver has two different triggers for both the mechanism and they both control each of the spinning chunks on your switchdriver. Not only that, but they have different power and torque settings as well to ensure that you can use them for all the right applications you might have planned them for. At times one of the triggers might not be working and you will be able to use the other one pretty fine.

That is caused due to a broken terminal or some burnt wire on that trigger and you will need to inspect the wiring properly. If the wiring is fine, you also need to check on the fuses and replace any blown fuses to have your Worx Switchdriver working perfectly without any further problems.