At times, it can get pretty troublesome for you to carry multiple tools to a job site and you might feel the need of having a single tool to get most of the work done in the right manner without carrying too much of the weight around for any of the job sites that you might be looking to work with and that is only possible with a handful of options that can get you the optimal experience with the application. Worx Switchdriver is one such tool that gets you the perfect utility and usage of both the drill and power screwdriver at the same time.
While there are two different switches to use the different features, there is also a knob that rotates and you get to use different bits for each application making the whole process seamless for you and you will be enjoying an overall great experience with the Worx Switchdriver for sure. However, there are certain issues that you might have to face as well on the Worx switch driver and they might be the reason behind the unpopularity of this highly thought-of tool. A few common problems that you will need to know about while using the Worx Switchdriver are:
Worx Switchdriver Problems
1. Bits Not Rotating
There is a rotating mechanism on the Worx switcher that allows you to rotate the drill and that is how you can switch between the bits and optimally use it for any of the applications that you might want to since that will be helping you out in ensuring the perfection of switching between a drill and powered-screwdriver in a couple off seconds and not only that, but you also get two different triggers on the Worx Switchdriver that help you get the work done in the right manner without facing any inconvenience.
However, at times you might not be able to rotate it and it will seem like it is stuck. To solve such problems, you will need to ensure that you are checking on the switch lock first and disengaging it efficiently since that can be causing you this problem and you must be solving it up efficiently if the switch lock is stuck at some point. After that, you will need to clean the Worx Switchdriver optimally and that should be enough for you to have the job done. Lastly, if nothing has worked out so far and you find yourself still stuck with the same problem, you need to ensure that you are disassembling it and checking for any broken gears that might have been causing you to face this issue. If you find any of the gears inside to be broken or stuck, you will need to have them replaced and that should be optimally solving all such problems for you that you have been facing earlier.
2. One of the Triggers Not Working
At times, you might also have to face the issue with one of the triggers on your Worx Switch Driver not working and that can get pretty serious at times since you will not be able to use the drill or the screwdriver for any reason and that will cause you to face inconvenience and the work will be halted as well. That is why you will need to ensure that you are getting the electrical components checked since most of the time this problem is caused if any of the cables that are connecting that particular trigger is broken down or damaged or there is some fuse blown on the said circuit that might be the culprit behind this issue.
That is why you need to start with the wiring and check on the cables and connections to ensure that they are connected optimally and that should be helping you out just right in getting the job done in a perfect manner without having to face any issues as such. If the cables are all fine, you will also need to check on the fuses and if you find any of the fuses to be blown, you should optimally be getting that fixed and have the fuse replaced with a new one that works. That will sort out the issue for you and you will be able to make the Worx Switchtriver work again.