Porter-Cable is one of the most popular tool manufacturers in the US that allows you to enjoy not only perfect efficiency but there is a lot more.
You will certainly be enjoying the right durability and performance over decades if you keep it maintained.
With all that, you will definitely get the optimal and perfect experience with all the utilities that you might have to make it all work for you.
So, be sure to stick to this brand if you’re new to the market. It will take a bit of time to get used to the basics, but you’ll be happy with this unit.
There are no better units on the market, and Porter Cable provides a comprehensive portfolio to the customers.
Fix Porter Cable Staple Gun Not Firing
You can stick to a minimal budget while also expecting decent performance. The only thing that you need to be mindful of is the basic maintenance cycle.
Yet, there are certain problems that you might be facing as well. Their staple gun is certainly great, and you will enjoy a perfect binding experience with it.
Yet, if the staple gun is not firing for some reason, here are a few things that you will need to take care of.
- Check the Battery
The first thing that you will need to check on is the battery for all the cordless tools as well as the Porter cable staple gun.
You will have to ensure that you do not have low charging on the battery that might have been causing you some problem like this with the staple gun firing.
That is why you will need to ensure that you have the right charging on the battery, and that will be the best thing for you to be enjoying the perfection of using the staple gun precisely for all such applications.
- Check Magazine
Another common problem that can cause you to have the problem with the Porter-Cable Staple Gun not firing is sometimes the staple pins in the magazine might be stuck.
There might be some other problem such as the pins getting stuck together, or not being set up in a proper manner.
That is how you should be able to make it work properly, and you need to clear out any such pins that might be stuck together and also be mindful about any staple pins that are not aligned properly in the magazine.
That should be the best thing for you to get it working, and with that in mind, you will be enjoying the best experience with the Porter-Cable Staple Gun.
- Clear the Barrel
You also need to be particularly careful about the porter cable staple gun barrel since it might have something stuck inside the barrel, or the pins might be getting damaged or bent, which might cause you to have some issues.
That is why you will need to make sure that you disassemble the battery and the magazine properly.
After that, you will be able to ensure that you are having just the perfect experience with all such applications with the porter cable staple gun.
You will not have to encounter any such problems afterward once you have cleaned the barrel properly to ensure that you can continue to enjoy the perfection of the gun firing properly.
If that doesn’t work out for you either, you will need to ensure that you are getting it checked at the porter cable, and that should be helping you out properly.
- Check The Magazine
At this point, you need to check the magazine to figure out the issue with the unit not working.
It can be more than just a little challenging to limit issues with the magazine, and you will need to make sure that the hardware itself is in good shape.
Sometimes, the fix is as simple as readjusting the magazine. However, if the magazine seems to be clogged and you’re not that lucky with a fix, then the situation can be a bit more complete.
You will have to make an investment in the new magazine, and there are no quick fixes here.
While some users have pointed out that gently tapping the unit is more than enough to fix the minor clogging issues, this fix is not that reliable.
You can always try your luck, but the more consistent solution here is to get a new magazine by reaching out to the dealer.
- Use Lubricant
It is also possible that you just need to lube up the unit to get a consistent response from the device. There are no quick methods when you’re dealing with a unit in poor condition.
The only reasonable thing that you can do to fix these issues is to access the head valve and lube it up.
Using lubricant might seem like a basic fix, but it has helped too many owners get through minor complications with the jammed unit.
From there, you can also check on the grease status. The situation with grease mixing up with debris to develop gunk on the pivot points is pretty common.
It will lead to a ton of issues down the road, and you will not be able to get any response out of the system.
So, all that you need to do is to keep using lubricant and address this issue by removing the old chunks of grease.
Hopefully, all errors will be addressed right here, and you will not have to deal with more errors down the road.
Fixing the unit is pretty easy as long as you’re keeping track of these basic maintenance cycles.
- Check the Trigger
Next, you need to also check the trigger for possible issues. Over time, the trigger can get stiff or damaged.
This is especially true if the conditions around the workshop are a bit harsh and the moisture content is a bit high. So, you will have to replace the switch assembly to get the right response.
Even when you’re keeping track of all the points above, you will not get the staple gun to work when the switch is not engaging the tool.
If that is the case, you will just have to fix the trigger and make sure that the gun gets engaged as soon as you press the button.
If you’re lucky, you will also be able to fix this issue by blasting around the trigger with compressed air.
That will loosen up the debris behind the unit, and you will have a decent shot at getting the right response from this device.
- Claim Warranty
Lastly, you need to reach out to the dealer and get help on this issue. There is a decent possibility that your unit is defective and you will not be able to fix it on your own.
So, the best thing that you can do in this situation is to let the dealer take charge of the station.
He will not only help you figure out the issue, but he will also guide you through each step. From there, you can also demand a replacement if the unit is defective.
There are no quick ways around it, and you will not be able to get anything out of the system if it is damaged.
So, be sure to go through the hassle of approaching the dealer and claiming the warranty.
As long as you have valid proof of purchase and the claim is valid, it won’t be that hard to get a new unit from the dealer.
From there, you can go about setting up this staple gun in your kit to use in future projects.
Wrapping Up
Ideally, you should be able to fix the situation with the Porter Cable staple gun by checking up on the battery status.
Even if you follow through with all of the maintenance cycles, fixing the battery can be a bit hard at times. You will need to make sure that the power going into the system is optimal.
Otherwise, you will remain stuck in these issues, and the unit will not respond to any input. From there, you can go about fixing the hardware side of things and make sure that the barrel is clean.
If there is gunk or debris stuck in the barrel, then you will not be able to fix the unit until the chamber is clean.
From there, you can also check for cracks and damaged sections. Issues with hardware damage can be pretty hard to fix at times.
There is not much that you can do on your end to fix these issues, and you will need to seek help from a professional.
For this reason, we suggest that you reach out to the official support team when you can’t seem to fix the issue yourself.
The experts from this team will guide you through a fix, and you will not have to go at these solutions on your own. Moreover, you can also demand a replacement if the unit is defective.