Milwaukee is another US-based tools manufacturer that is known for exceptional performance, a huge inventory, and not only that, but their tools have really attractive price tags as well. What are all the reasons for anyone to be considering the Milwaukee tools for the work and they can make it work efficiently, without having to worry about the durability of these tools either. All that will make Milwaukee the first choice for any worker and that counts a lot towards the popularity of Milwaukee tools that are being used widely for all the different sorts of commercial, industrial, and construction applications out there.
Milwaukee makes a wide range of tools that you can possibly get your hands on, and all you need to make sure is that you are figuring out what your needs might be. With that, you will be able to pick the tool that will help you precisely to get the job done effectively and with that, you will never have to worry about a single thing for sure. Their tubing cutter is one such tool that is cordless and you get to enjoy a perfect experience with the durability, handling, and portability with it at the same time while cutting the tubes for any wiring, plumbing, or other needs you might be having. There are hardly any issues with it either, but a few problems that you will need to be careful about are:
Milwaukee Tubing Cutter Problems
1. Battery Not Holding Charge
The first and most common problem that you might have to face on the Milwaukee Tubing Cutter is that the battery will not be holding a charge and you will have certain inconveniences while you are trying to make it work for any of the needs you might be having. While the battery is pretty great, it can be used for up to 200 cuts once fully charged and that is why you will not have to worry much unless there is something wrong with the battery or the circuitry.
To start the diagnosis, you will need to check on the battery and terminals and ensure that the battery is properly installed and the terminals are not corroded either that can discharge the battery even while it is not in use. If the terminals are fine, and you are still facing the problem, you need to check the tool, as there might be some internal short circuit on the tool that might have been causing your battery to be drained. Lastly, if everything checks out, you might have bad battery health, and getting it fixed should be the best thing that can help you out in getting the job done for you.
2. Tool Not Working
At times, you might have full charging on the tool, yet the Tuning Cutter will not work as it is supposed to and you will be stuck with the work to be taken care of. If you are facing any such problems, you need to check on the trigger first as the trigger might have some gunk built upon it and could not be working. That is why you will need to ensure that you are cleaning the trigger properly and that should be the best thing for you to have the perfection of not getting any such problems with the Milwaukee Tubing Cutter that you are working with.
If the trigger doesn’t solve the problem for you, you will have to make it certain that you are checking on all the fuses as well, since some wire might be broken or a blown fuse could be the culprit here. Solving all such problems will be helping you out in order to make it work properly for you.
3. Blade Getting Stuck
The blade can also get dull and that is something that you will need to be careful about. You will need to take the blade off, and if the blade is stuck and it won’t come off, you will need to solve that as well. There could be some copper particles stuck inside the blade that you will have to fix up properly. WD-40 or some other rust removal spray will get the job done for you and after proper cleanup, you will be able to make it all work in the right manner.