Kreg is the brand that you need to choose for any sort of hand tools that you might be looking for.
They manufacture a wide range of hand tools that you can use for a wide range of options with perfect durability, utility, and of course, the applications that you might have in your mind.
However, variety is not everything, and you should focus more on the quality of the tools and their maintenance.
Luckily, Kreg has got you covered with some of the best options on the market. You will enjoy a ton of utility from this brand and won’t have to switch over.
The best thing here is that you will have to spend a minimal budget, and the quality is far better than any other option on the market within the same price range.
So, be sure to stick with accessories like the Kreg 90 Degrees corner clamp for your unit.
Kreg 90 Degree Corner Clamp Not Working
Kreg 90 Degrees Corner Clamp is one such tool that you can get your hands on, and it is used for keeping the corners joint at 90 degrees for woodworking applications.
However, if it is not working out for some reason, here are a few things that you will need to do.
- Check the Thickness
The first thing that you need to ensure is that you are checking on the thickness of the panels that you might be working with.
If the wood panels are thicker or simply a bit thinner, then the right thickness is needed for the clamp to be working properly.
That is why you will have to ensure that you are checking the thickness and getting the optimal thickness of wood that will be compatible with the clam that you are using.
That will definitely help you to solve the problem for you.
- Adjust It Right
Another common issue that most people face while they are using the clamp for any of the reasons is that they might not be adjusting it right, and that could be causing you to face some issues.
That is why you will need to ensure that you are checking on all that properly and ensure that you are adjusting the clamps in the right manner.
You need to be careful about the angle, the clamps fitting properly, and more in order to have just the right experience with the Kreg 90 Degrees corner clamp that you might be having.
- Check the Arms
Sometimes, the arms on your Kreg 90 Degrees clamp might be worn out that might be causing you to have the issue, like the arms not adjusting properly.
So, you will need to ensure that you are checking on the arms and getting them changed or replaced properly to have the right grip on them as well.
That should help you to make sure that you are not having any such problems or errors with the Kreg 90 Degrees clamp that has not been working for you previously.
- Check Locks
If the clamp is not working out fine and it is not holding upright, you might be having a problem with your locks on the clamp being loose or damaged.
That is why you will need to ensure that you are checking on all such factors and getting the locks repaired or replaced if needed.
That should be helping you out for sure, and you will be able to make the clamp work properly without any issues or problems at all.
- Loosen Up The Tension
The next thing that you need to do here is to loosen up the tension.
While that might seem counterproductive, many owners make the mistake of overtightening the arms just to have them bend out of shape. If you’re in the same boat, try to loosen them up a bit.
You don’t need the clamp to firmly grip each section. Instead, you need to think of it more like a base where the material can rest without having to bend out of shape.
In most situations, loosening up the unit will do the trick. So, keep that in mind when you struggle with the tool.
All it takes is a bit of effort to adjust to the pressure through the camp. So, be sure to keep that in mind and try out the system again.
Hopefully, you won’t have to worry about anything after that point, and the clamp will start working perfectly.
Otherwise, there is no harm in reaching out to local experts to get the unit required.
That will be enough to help you get through minor errors with the unit, and you won’t have to bother with the same issue again. So, keep that in mind and try out the system again.
- There Might Be Hardware Issues
The delivery process can be especially hard on these units, and there have been countless reports of issues like the spring falling out or a section of the clamp missing.
Keep in mind that you’re not liable for any of these damages. You need to reach out to the dealer about this issue.
He will guide you on how you can maneuver through the issue without having to waste any time or hassle.
All you have to do is to show a receipt or any proof of purchase to the dealer. That will be enough to help you verify the purchase.
From there, you can grab a replacement in no time as you try to adjust the smart system accordingly.
There is no point in trying to make use of a broken unit, and you will only run into more issues down the road.
So, you shouldn’t try to get this tool fixed by local experts or purchase any replacement components for the system.
Instead, you need to get a fresh piece from the official support. So, all you need to do here is to reach out to the dealer, and he will guide you accordingly on how to get a new one.
- Call Customer Care
If you’re unable to get through the issue even after trying out all of the fixes mentioned here, then you need to call the customer care team.
They will guide you on how you can isolate these errors and proceed with the troubleshooting routine.
The customer care team maintained by this brand is far better than any other option that you will find on the market.
It will keep you served with optimal response time and support. So, you won’t have to worry about spending any extra time or going through any more hassle.
All you have to do here is to contact these professionals. They will make it much easier for you to get through the inspection if you don’t know how to check the unit for hardware damage and tension issues.
Hopefully, that will be it, as you’re trying to fix the clamp.
Wrapping Up
These are a few methods that you test out on the Kreg 90 degrees clamp when you can’t seem to fix the unit.
It might seem a bit extensive, but you’re not left with any other options here. So, be sure to go through the solutions mentioned here, and you won’t have to struggle much with the unit.
It all comes down to the condition of the hardware. If you’re sure that the hardware is in good shape, then fixing this error will come easily to you.
However, if you’re not too sure about the unit, then you will have to grab a replacement.
You should not waste any time with a defective unit, and getting dealer support to help you out is a better idea.
So, be sure to keep that in mind as you try to adjust the system. Hopefully, the dealer will help guide you through the minor details, and you won’t have to bother with the situation.
All you’ll need to show is valid proof of purchase, and the dealer will take it from there.
So, be sure to keep that in mind when you can’t seem to adjust the issue with your unit.