How To Grease Bauer Hammer Drill (Simple 8 Steps Guide)

how to grease bauer hammer drill
how to grease bauer hammer drill

Harbor Freight Tools or also commonly known as Harbor Freight, is a privately held tool retailer that also deals with tons of equipment. The company also has a smaller brand that is known as Bauer.

This has a huge lineup that you can select from, and each of these tools is equipped with tons of features.

The hammer drill from the brand is one of the best tools that you can get. This comes with tons of features that allow people to work on their projects easily.

Aside from the utility brought forward by all of its features, you will get a pretty decent price tag here. You will not have to go over the budget to include this item in your kit.

This is especially true for first-time owners that are not planning on spending the top buck on their first kit. 

How To Grease Bauer Hammer Drill?

Though, there have also been some questions from users who have been asking how to grease the Bauer hammer drill.

Hence, we will be using this article to provide you with a list of ways that can be used to do this.

When it comes to power tools like Bauer, hammer drills are used to slice through durable materials. This allows them to capture some dust around them that eventually starts to enter the device.

The main issue with this is that the performance of your motor can decrease, which prevents it from functioning properly. 

Clearing out all the dust and then lubricating your device can help in preventing this issue from ever appearing.

Keeping this in mind, here are some simple steps that can be followed for this.

follow

  1. Take off your Bauer hammer drill from its main power.
  2. Now, wait for a few minutes, as this helps the power tool in getting rid of the power circulating inside it.
  3. Once done, the user can then remove the connecting rod inside the hammer drill by turning and pulling on it. Make sure that you use a wrench if this is stuck inside the power tool.
  4. After removing it, you can clean all the dust sitting inside the hammer drill.
  5. Now take a lubricant and start applying it inside the device. Make sure that you cover the moving parts carefully so that these are completely covered. Using too much lubricant is not recommended as this can cause problems for people instead.
  6. With that being said, you can now close your connecting rod and install it back in tightly.
  7. Spin your power tool for a few minutes so that the lubricant spreads inside it.
  8. The user can now continue using their hammer drill without any worries.

The steps mentioned above are enough to grease the hammer drill from Bauer. Though, you should note that the process should be repeated frequently for the best results.

quality

Moreover, the quality of the lubricant that you use also plays a huge role in how it will perform.

The better the solution, the longer it will last, and the more your motors will be preserved. If you have any further questions regarding the power tool, then the support team for Bauer can be contacted.

When To Grease Bauer Hammer Drill?

The basic rule here is to grease up the system once every month, but all that depends entirely upon the usage.

If you don’t use the system often and it is stored properly, then you might not have to grease up the system so frequently.

On the other hand, if you have a habit of using the hammer drill for minor tweaks or demanding projects every day, then you will have to grease it up pretty frequently.

Spending a few moments out of your routine and greasing it once every two weeks will be enough for you to get optimal performance.

You’ll notice the drill going a bit out of order when it needs a lubricant. You will not only have to put more pressure on the bit, but the unit will start cutting out as well.

This situation can be more than just a little damaging to the unit, and you will run into a ton of errors in the long run.

So, if you feel that the drill is not operating smoothly, it might be time to grease it up.

There is no point in sticking to any defined maintenance timing, and you should instead judge from the performance of the unit.

maintenance

If the performance is poor and there are no issues with the power, then you should grease it up.

Ignoring the greasing requirements of the unit will create more friction, wear, and rust on the system.

Even if you’re properly storing the drill, wear on the system can appear after extended use. Moreover, the friction from the bit will transfer heat into the drill, causing it to stop working.

You will have to be mindful of these requirements at all times and never go more than two weeks without proper maintenance if you use the hammer drill daily.

There is not a single brand on the market that can work if you keep ignoring the maintenance requirements.

maintenance tools

This is especially true for power tools, and you will have to take the time out of your routine to keep these units in perfect shape.

Otherwise, you will start running into more issues down the road, and then the drill will not respond to any input. 

What type of grease should you use on the Bauer Hammer Drill?

Most owners like to stick with Lithium base grease, and you should do the same. It will perfectly protect the unit without creating any issues with the pivot points or the mount.

Be sure to only stick with the established brands and don’t rely on cheap options like oil to grease up the unit.

That will not have any impact on the unit, and the lubricant will wear off in no time. So, you will need to protect the unit accordingly and just stick with the Lithium-based options.

lithium base grease

If you’re confused, then you can ask the experts working in the hardware store about the right fit.

They will point you in the right direction toward high-value brands. Most of the time, the grease is not that expensive, even if you’re purchasing from premium brands.

So, be sure to spare a few more bucks and only stick with the established brands. 

Otherwise, you will not see any results, and the unit will run into more issues down the road. It all comes down to how you’re planning on addressing the situation.

Fixing the device will come easy to you when you’re using the right materials, and going cheap will create more potholes. Similarly, you need to also focus on greasing up the chuck and the SDS mount.

These components should not be ignored when you’re aiming for peak performance, and it can take a while to perfectly manage the lubrication process.

performance

The chuck, as well as the SDS mount, can be considered the most crucial elements of the hammer drill, and you will notice the clear difference in performance after greasing these up.

The drill will run pretty smoothly, and you will not notice any hiccups when trying to get through a demanding project.

One thing that you should always keep in mind is to first clean the unit.

Ignoring this step will only create a gunk-like consistency on the components where the debris will mix up with the lubricant to clog up the system.

clean

So, you need to blast away the debris. You can use a can of compressed air or an air blower for this process.

There is no point in trying to ignore this step, and you will run into complications with the smoothness when the debris is not wiped away properly. 

Wrapping Up

Struggling with the Bauer hammer drill not operating properly? The pointers here should be more than enough to help you grease up the Bauer hammer drill.

It will take a few minutes at max, and you can get through with the greasing routine in no time.

All you have to do is to first blast away the debris and then apply a lithium-based lubricant to the SDS mount and the chuck along with the internal rods.

From there, you can let the drill sit for a few minutes before you test out the performance. 

You need to always use the recommended amount of lubricant, and adding too much will only create a ton of issues down the road.

So, to avoid that situation, you should just focus more on adding small amounts of lubricant and then test out the drill to see if the smoothness is better.

lubricating

From there, you can go about the trial and error routine to find the perfect spot. It will take a few tries, but once you’re used to the greasing routine, it will be pretty easy to manage this device.

You can even get pointers from an expert, he will show you step by step on how to get through the process.

Leave a Comment