8 Ways To Fix Drywall Screws Won’t Go all the Way in

drywall screws won't go all the way in
drywall screws won’t go all the way in

Drywall screws are one of the best ways for you to ensure that you can use them for hooking some panels, some shelves, or for any other needs on your wooden walls.

These are self-tapping screws that you will enjoy for sure, and you just need to screw them inside the wall.

Most of the time, you can just rely on the drywall screw gun to help you out in the smaller projects. This gun will make sure that you don’t have to damage the drywall or waste any time trying to manage the project.

Moreover, using this gun is pretty easy and straightforward. 

While there are some owners that prefer the use of a drill to help out with a project, the drywall gun is just superior. You will not have to deal with as much hassle, and the precision of the project will be much better.

So, be sure to rely on this option in the long run. Otherwise, you will remain stuck.

However, at times you might be facing problems like these drywall screws not going all the way in, and that could be quite troublesome for you to have. That is why a few things that you will need to make sure about it all are:

Drywall Screws Won’t Go All the Way in

  1. Clean the Hole

At times the dust particles that might be there due to the screw will not get out, and they will cause you to face blockage.

That is why, once you start feeling like the screw is having a hard time going all the way in, it would be better to unscrew it and then clean the hole using some blower. 

It will definitely help you out to ensure that you are able to screw drywall screws all the way in, and you will not have to face any other problems at all afterward.


  1. Check for support walls

At times there might be some support walls at the back of your wall that you are trying to fix the drywall screws in, and that could be a major issue for you to not have drywall screws go all the way in.

That is why, to fix up all such issues and problems that you might have been facing, you will need to ensure that you are checking for the depth of your screws and the walls.

If there are any such walls behind, you will need to make sure you are getting the right length of screws.

  1. Check for the type of Screws

Another thing that you will need to make sure of is that you are picking the right type of screws as well. There are multiple types of screws that you can get, and they are suitable for specific types of materials.

That is why you will need to make sure that you are choosing the type of screws that will be appropriate for the wall type that you have.

That will definitely help you get rid of all such problems that you might have been facing with the screws not going all the way in.

  1. Change the screw

If all of the above checkouts are just fine, and you are still not able to make it work since the screws will not go all the way in, there is a high possibility that the edge of your screw might not be sharp enough, or there could be another issue with that particular screw.

So, you will need to change the screw with another one of the same style and size, and that will help you to make sure your drywall screws are going all the way in.

  1. Lubricants Will Help

At this point, you should just start relying on some lubricants. If you’re not able to get any response out of the unit, and it will not engage, then you need to get some lubricant.

customer response

Relying on any other option will only hold you back as you struggle to get a response out of the system. 

All it takes is a bit of grease or any oil to help you get through the final push. So, instead of forcing your way in and risking damage to the wall, you should just cover the nail in lubricant.

From there, you can go about driving the nail into the wall to avoid more errors down the road. 

Mostly, all that you need is a bit of nudge, and the lubricant will help you do just that. You will not have to worry about any extensive errors when keeping track of these pointers. So, be sure to get some lubricant and try it out. 

  1. Use Pilot Holes

The use of pilot holes will also help you get the same outcome. When you’re stuck in these errors, the use of a pilot hole will help you develop an opening to drive the nails perfectly in the optimal space.

You will not have to use any excessive force or rely on any more complications with this system.

While developing pilot holes for each screw is an extensive job, you are not left with many options at this stage. On top of helping you drive the drywall screws perfectly into the wall, you will also get a precise setup.

So, be sure to rely on this option when you’re stuck. 


Ideally, it will not be that challenging for you to find a way around these errors. Just make sure that you’re not drilling into a stud or a support wall. Otherwise, even the pilot hole will not serve you when that is the case.

So, be sure to first check and then double-check for the support walls. Otherwise, you will just be holding yourself back and compromising the consistency and durability of your setup.

Hopefully, these pointers will serve you well as you’re trying to figure out a solution. 

  1. Adjust the Pressure

Adjusting the pressure is just as important in some situations. When you can’t seem to figure out the errors on your own, the best thing that you will have to do is to adjust the pressure.

You will not be able to get any responses out of the system when the pressure is too little. 

This is especially true when you’re using no pilot holes and are only relying on a power gun to help you out. So, you need to go about increasing the PSI configurations and making sure that the pressure from the main unit is optimal.


Otherwise, you will remain stuck in these errors.

Similarly, the situation can be more complex when the pressure is leaking out or the gun is in poor shape. So, when you do get stuck in these errors, we will suggest that you address the situation with the power and the air pressure. 

Hopefully, you will get a reasonable response from the gun, and the drywall screws will go all the way in. you will not have to deal with as much hassle, and fixing the unit will be fairly simple for you. 

  1. Hire A Local Contractor

Lastly, we will say that you should just call it a day. You need to reach out to the local experts and have them guide you through the rest.

There is no point in wasting more time on your own, and you need to engage the officials on this issue. They will be more than happy to help you out. 

Spending a bit of money to hire a contractor will save you from hours of work. Moreover, you will be happy with the performance and the quality of work offered by these experts.


So, spare a few bucks and reach out to the dealer. Hopefully, you will be sorted out in no time. 

Wrapping Up

Struggling with the Drywall screws not going all the way in? There can be a ton of factors that can play into these citations. So, we have listed some of these factors while also detailing possible fixes to help you out.

Hopefully, you will not have to go through much hassle after testing out the details here.

All that you have to do in most situations is to check up on the hardware itself. You have to make sure that the screws are in perfect shape and reasonably built.

Using cheaper options will not serve you well, and you will only be dragging yourself down in most conditions. 

If you can’t seem to find the right drywall screws for your project, then ask the local dealer. There is no point in guessing the perfect fit when you can just ask the dealer to help you figure out the right option.


Hopefully, you will not have to go through much hassle that way.

Similarly, you can get pointers by asking the experts on online forums. If you’re not that sold on the idea of visiting your local store, there is no harm in getting help from the experts.

All that you will need to do is to explain your end and then get points from the officials. That will serve you much better. 

Leave a Comment