Tenergy chargers are the best battery chargers that you can get out there, and they allow you to enjoy a far easier charging experience for all the different sorts of batteries that you might have.
Moreover, the price point here is pretty reasonable, and you will not have to go out of budget for this purchase.
It is perfectly great, and there is hardly some problem that you might encounter while you are using the Tenergy Charger to charge the batteries for any application that you might have on your mind.
So, be sure to test out this option, and you will not have to worry about upgrading to a better charger.
The only point that you should be careful about is maintenance. There is not a single product in the market or a single brand that can perform well in these conditions.
Fix Tenergy Charger Blinking Red Light
So, you will need to go about managing the charger accordingly. Otherwise, you are bound to run into complications.
With all that being said, at times, you might face the problem with the charger blinking red light, and that can raise some concerns for you for a certainty.
A few things that you can try out to ensure that you don’t have to face any problems as a result are:
- Check Batteries
The first thing that you will need to check on is the batteries that you have installed in the charger and that you are trying to charge them.
A red blinking light is a sign that there is something wrong with the batteries. So, the best thing for you to do is ensure that you are making sure your batteries are in the right health and are not faulty.
The best way to check it should be to change the batteries with some fresh ones and see if the light goes off.
If the light goes off, that would mean the batteries are faulty, and simply getting them replaced would be getting the job done for you certainly.
If that is not the problem, there might be something wrong with the charger.
- Check Terminals
The next thing that you will need to check on are the terminals, and you have to ensure that you are checking them up properly.
To do that, you will need to make sure that you are simply getting the terminals flexed a bit and see if they fit the batteries right.
These terminals have springs on them for flexibility, and if they are unable to get in contact with the batteries, it will cause you to have some problems.
That is why you need to check the terminals and clean them properly.
Not only that, but you also need to ensure that you are properly fixing the springs so that the terminals can be in contact with the battery points perfectly as well.
- Change the Charger
If you are unable to fix the problem by changing the batteries, and you have fixed the terminals as well, there could be some other reason.
There can be issue like a malfunction on the charger, that might be causing you to face this problem.
So, you will need to ensure that you are replacing the charger, and that should get the trick done for you perfectly.
Just getting a new charger will solve all such problems for you, and you can make the charger work for all the different sorts of batteries that you might need to make it work.
Chargers can be easily available, and that would be just the right solution to make it all work for you.
- Try Jumping The Battery
This situation with the charger can also present itself when the battery is completely drained. If you have a habit of using the battery below the 20 percent mark, then you are likely in the same boat.
Luckily, fixing this situation is not that hard. You just need a pair of wires and a fresh battery pack to limit these errors.
So, be sure to grab these components and connect the drained battery with the fresh one with the wires. Leave the terminals connected for about 20 minutes.
This will be enough to jump the drained battery, and you can check up on the response after placing this battery in the charger.
Ideally, the charger will pick up the battery at this point, and you will not have to deal with more issues on your end.
- Check For Compatibility Issues
The situation with the compatibility issues can also be annoying at times. You will not be able to get any response out of the charger when the battery you’re using is of a higher voltage.
So, if you’re not that sure about the compatibility, try asking the dealer or check the manual.
If you do find there to be compatibility issues, then the only thing that you can do is to get a new battery.
There are no quick fixes here, and you will have to source a new battery that is compatible with the charger.
Otherwise, you will remain stuck in these errors, and the battery charger will keep flashing the red light.
Hopefully, it will not be that hard to limit and address these issues, and the dealer will point you toward the right options for this charger.
- Let The Unit Cool Down
Sometimes, all you need to do is to let the unit cool down a bit. There are no quick fixes when the charger or the battery has been in use for a long time.
A few minutes of break in a shaded region will be more than enough to bring the temperature down. This is especially true if you live in a hot region and don’t know how to go about fixing these errors.
If you do put extra load on the power tools and don’t take many breaks, then now might be a good time to do so.
You can try touching the battery with your finger to keep track of the temperature. If it is too hot, then let it cool down for a few minutes and then try it one more time.
Keep in mind that the battery will not start charging until the situation with the extreme temperature is fixed.
So, be sure to keep that in mind when you can’t figure out how to tackle and address these errors.
- Ask The Official Support
Lastly, if the issue seems to be out of your hands, then you need to reach out to the official support team.
These members will take a look at your case and then guide you on how to tackle these issues. There are no quick fixes when you’re dealing with a damaged unit.
So, the best thing that you can do is to reach out to the dealer or the official support team. These experts will first try to help you address the situation with a few quick fixes.
However, if that doesn’t cut it and you’re still stuck, then you will be sure that the unit is damaged.
You can then demand a replacement and the dealer will verify your claim on his end. There are no extra steps here and you should focus more on getting a fresh piece by claiming the warranty.
If everything goes well with the claim, you will have the new piece within the same week. From there, you can just make use of this new piece to go about your projects.
To speed up the verification process, make sure to provide the dealer with a valid proof of purchase like a receipt.
That will make your job much easier in the long run and you will get the new unit quickly.
Wrapping Up
These are some things that will help you get the battery charged from the Tenergy battery charger.
The situation with the red light is not that rare, and you should not get alarmed when you run into these issues.
So, be sure to keep track of these pointers when you can’t get the charger working properly. Your best bet to fix this situation is to check up on the battery as well as the charger hardware.
If you do find issues with the hardware, then there is not much that can be done except getting a replacement.
However, if you’re sure that the charger is in good shape, then the basic steps above should help.
It all comes down to the final situation with the charger, and you will be able to fix these errors pretty easily if the charger is in good shape.
Most of the time, the issue is with the battery and not the charger. So, you will need to go about fixing the battery accordingly.
Hopefully, you will not have to deal with more hassle, and the unit will start working perfectly in no time.
You can also engage the official support team when running into these issues. They will give you a much better perspective on the error, and you will not have to deal with all of these pointers on your own.