Milwaukee tools are the US brand for a wide range of tools and equipment that you can need for getting any sort of job done.
They are manufacturing a really huge inventory ranging from all the different sorts of generators, power drills, compressors, and more that are going to help you out in making sure that you have the appropriate tool for any task at hand,
Let it be in your own garage or out there on some construction site where you are getting things done for a project.
That is certainly great to have, and with all that, you also get to enjoy some highly durable and powerful cordless tools that run on the battery.
The best thing is that Milwaukee also manufactures batteries that you can use with these cordless tools, and you will never have to worry a bit about the efficiency of the tool, compatibility with the battery, or losing power at all.
Milwaukee V28 is one such lithium-ion battery that you get, and it allows you to have a better run time with efficient power delivery on all the different tools that you might want to use it for.
But, like all the other batteries, there are also some issues that you might have to face with it, and a few such common problems that you need to be aware of are:
Milwaukee V28 Battery Problems
- Not Charging
One of the most common problems that you might have to face with the battery is that it won’t charge at all, and that would cause you to face a number of issues since you will not have the appropriate power for your tools.
You will find yourself in a fix while trying to make it work for any work that you might have planned for.
If the battery is not charging for any reason, you need to check on the battery temperature first and ensure that you are charging it at the optimal temperature.
After that, you will also need to ensure that you have connected the battery to the compatible charger and that the charger is also working fine so that you don’t have any issues with that part.
Lastly, you also need to check the terminals on both the charger and your battery to make sure that there is no corrosion on them since that can also interrupt the charging of your battery.
If you find any corrosion, you will need to clean the terminals properly to ensure that your battery can be charged up properly without causing you any issues.
- Swelling
Another common problem that you have to face with not only the Milwaukee V28 battery but is a problem with almost all the lithium batteries you might be getting out there is the battery getting swollen, and that will reduce the battery functioning greatly as well.
This is caused due to overcharging the batteries or inappropriate charging, and you should be avoiding that at all costs.
So, you should disconnect the battery from your charger as soon as it gets charged, and not only that, but if your battery is swollen and you notice that, you need to stop using that battery since it could explode, and that is certainly not something you would want to have on your battery.
- Not Giving Ample Time
You might also be noticing that the runtime of your battery with the tools is getting reduced, and that could be caused due to a number of reasons.
All lithium batteries have their health deteriorate over time and usage, and you need to be prepared for that.
If you are getting any such issues, you need to ensure that you are charging the battery with the appropriate charger and properly to ensure that you don’t have to face any such problems.
However, if that doesn’t solve the problem for you, you would have to get the battery replaced with a new one since there is nothing that you can do to restore the battery health, and replacing the battery is the only choice you are left with in order to get the appropriate experience.
- Overheating Issues
Next, you might also run into situations where the unit is overheating, and you will not be able to get any consistent response out of the device. It might be one of the more annoying errors, and you will have to keep track of the temperature at all times.
While it is not new news for a unit to get hot when put under load, you will struggle with consistent temperature spikes with this unit. So, you will have to go about addressing the situation accordingly.
The best thing that you can do here is to check up on the terminals and make sure that nothing is clogged between the contact points.
This is especially true if you don’t put any mind to the maintenance side of things and the situation with the unit is a bit dire.
So, all that you need to do is to blast the unit with compressed air, and that will get rid of the dust particles and grime. From there, you can adjust the unit back into the power tool and make sure that the connection is tight and secure.
Ideally, you will be sorted at this point and will not have to deal with more errors down the road.
It all comes down to how you’re planning on addressing the situation with hardware damage, and these pointers should be more than enough to help you out.
Lastly, you should also consider decreasing the load on the power tool to check up on the performance. Sometimes, trying to speed through the project is not a good idea, and there is a very real chance that you will end up damaging the unit in the process.
- Charger Won’t Pick Up Battery
The situation with the charger not picking up the battery is not that rare and can be linked to a fully discharged battery. If you have a habit of using the battery past the 20 percent limit, then you will also run into the same issues.
The only thing that you can consistently do to fix this situation is to adjust the charger one more time after jumping the battery. That should mostly be enough to have you sorted here, and you will not have to worry about dealing with extra problems.
To jump the battery, you need to connect two wires with the terminals of the current unit and a charged battery. From there, you just have to leave these batteries for about 20 minutes and then check up on them after that point.
Ideally, you will be able to get a response from the discharged battery after inserting it into the charger this time around.
If the issue does get fixed at this stage, you need to just focus on keeping the battery above the 20 percent limit. Otherwise, you will struggle to maintain the integrity of the battery over the long run.
- Reduced Power
The situation with reduced power from the unit can also be hard to handle at times. There is nothing more annoying than spending hours on a project just because your power tools are not performing optimally.
Most of the time, these issues are linked to the battery, and you have to check on the integrity of the unit. Usually, customers mention that one of the cells in the battery has gone bad when they can’t seem to get a decent response out of the unit.
So, you might be in the same situation, and you will have to get a replacement.
This is especially true if your battery is new and you can claim the warranty. There is no point in trying to fix the unit on your own, and reaching out to the official support team will have you sorted.
All you have to do is to explain your end and then wait for further installations. It will not take long for these experts to respond, and they will guide you through a fix.
Wrapping Up
Planning on putting your money on Milwaukee V28 Battery? Try going through some of the common Milwaukee V28 Battery Problems listed here to improve your understanding of the unit.
While these pointers don’t mean that you have a bad unit, they do mean that you need to be more mindful of maintenance and keep the unit in good shape if you want to avoid some issues down the road.
So, be sure to track these pointers to get a decent response from the system.
It all comes down to how you’re planning on addressing the situation, and going through the basic maintenance cycle is not that difficult. So, be sure to spare a few minutes to adjust the system, and you will not have to worry about battery problems again.
Lastly, if you do get a defective piece, you can forward a warranty claim immediately to get your hands on a new one. That way, you will not have to worry about the performance of this system.