A planer is one of the essential tools for people involved in woodworking as it helps produce wooden boards with even thickness. In addition, it also helps ensure the plane lays flat on the side. It is pretty clear that a planer is critical to completing the woodworking projects, and there are various brands out there that help woodworkers complete their tasks. One such brand is Dewalt, and there is nothing better than a Dewalt 735 planer. This planer comes with an expensive price tag and is quite heavy in weight, but it also promises top-notch performance. Still, there are various Dewalt 735 planer motor problems that one should be aware of, and we are mentioning them all in this article!
Troubleshooting Dewalt 735 Planer Motor Problems
1. Dust Collector
The dust collector is an important part of planers as it holds the cut-out wood particles as well as the accumulated dust to make sure the device keeps working properly and doesn’t have any hindrance. However, this planer doesn’t come with the dust collector, but there is an option of connecting the dust collector. Still, it would be better if the planer came with an in-built dust collector.
2. Incremental Depth Issues
When it comes down to the incremental depth features, there are just too many designed in this planer, which can be extremely confusing. Honestly, one could try using the depth measuring scale, but it is too much hassle, and you still won’t have access to the accurate value.
3. Improper Blade Function
The blades of the planer tend to wear out with time, which can result in improper functionality. It is needless to say that the blade function is critical to completing the woodworking functions. So, if the blades on the planer have stopped working, there are multiple reasons behind it. These include over-using, overheating, and overworking. For the most part, all these issues need the replacement of blades to make sure the planer does its job properly.
With overworking and overusing issues, you can only try to reduce the utilization and don’t forget to give your planer some rest after every one to two hours. In addition to this, make sure that your planer doesn’t get overheated because it can result in blades’ ineffectiveness.
4. Stuck Blades
There are times when the blade stops working or gets jammed, and in the majority of cases, it’s because of greasing. For this reason, it is essential that you grease the blades regularly and properly to ensure they keep moving smoothly and there are no limitations. In addition to this, you should always purchase high-quality blade grease to ensure the blades are properly greased. As far as the loss of grease is concerned, you need to remember that it happens when you keep shaping the wood planks without considering proper maintenance, such as rest and greasing.
To illustrate, when the wooden particles collect alongside the motor chains and blade edges, the particles will result in jamming of the blades. In addition, the blades are likely to get blunt over the course of time. This results in the improper cutting of the thick wooden planks and hardwood. So, all you’ve to do is grease the blades regularly.
5. Tight Gears & Bearings
The planer motor is integrated with multiple components to deliver the best performance, including gears, bushings, and bearings. However, all these components have the capacity of getting dry, which also leads to dry configuration. The problem is usually a result of insufficient power sources. For this reason, whenever you connect the planer to the power source, make sure the extension cord is working properly. Secondly, you’ve to check the overcurrent switch and ensure that it’s working optimally.
6. Chip Buildup
While there is no chip collector already, and you’ve to install one on your own, it is a hassle already. However, even if the dust collector has a connection, the wood chips tend to build up. This makes it challenging to turn the handle on the planer. For this reason, you need to be extremely careful about adjusting the dust collector and doing it manually. Also, whenever you use the planer, clean the chip and wood dust to prevent jamming.
On a concluding note, these are some common problems, but they are pretty easy to resolve.