Finish nailers are tools that are used once you are done with your projects. These are used to install your materials or trim them slightly at the end.
The device comes in several varieties, and its features can depend on it from model to model.
It can be a struggle to find the right fit on your own if you’re new to the market. So, be sure to engage the dealer, and he will make your job much easier.
All that you need to do is to inform him about your requirements, and then he will list all of the options that will best suit your budget.
There is no such thing as one perfect unit for all projects. You will have to cycle between different devices to find the right fit.
So, if you’re not that sure about the project requirements, asking the dealer and sticking with established brands like DeWalt is the best option for you.
DeWalt Finish Nailer Troubleshooting
Moreover, the company that you get your finish nailer from also plays a huge role in how it will work.
This is why it is best that you carefully select a brand that is known for having good-quality products.
Talking about this, DeWalt is an American manufacturer that has a huge lineup of power tools that people can choose from.
When it comes to this, you should note that there are several models of finish nailers that you can purchase.
While all of these are amazing, there are also some issues that you can run into with them. If your
DeWalt finish nailer is running into problems, then going through this article should help you in finding some troubleshooting steps that can be used.
- Checking the Battery
The finish nailer from DeWalt is a cordless tool that works using a battery. This saves people the trouble of having to use air compressors every time they want to use a power tool.
Though, the user has to keep the battery in check at all times to avoid any problems with it. The first thing that you should check is if your battery is completely charged.
You can do this by plugging the finish nailer with the DeWalt charger and waiting till the LED light on it becomes stable.
This should flash as long as the device is charging, which indicates that you should wait patiently. In case the LED light on your charger is not flashing, then this means that your battery might be loose.
You can easily take this out by holding the small button above the battery compartment and then sliding it down.
Once done, the user can install the battery back in tightly and see if it starts charging.
Other than this, the charger getting damaged is another reason why your battery might not be properly charging.
You can try replacing the fuse inside it to see if the problem is fixed. If not, then you will have to get the charger replaced with a new one.
- Clean Your Finish Nailer
Sometimes when trying to use the DeWalt finish nailer, people might notice that the device is not functioning properly. This usually means that something is stuck inside the moving parts of the power tool.
Keeping this in mind, you must clean the piston along with the motors inside the finish nailer every time you are done with your project.
This helps in preventing the device from clogging or running into issues like this in the future.
Additionally, people can also lubricate the power tool so that it runs smoothly. This helps in further preserving the motors used in your device and makes them last a long time without any issues.
Aside from this, the magazine and nosepiece of the device also require a thorough cleanup as this collects a lot of dust and debris.
Clearing it out can also prevent the particles from entering the moving parts of your device.
- Faulty or Broken Parts
If you are still getting the same problem with your finish nailer, then there is a high chance that some parts of it might be broken.
You can easily notice this by observing the tool and taking it apart. The broken parts can be replaced with new ones by ordering them from DeWalt.
Although, there might also be some users that feel hesitant about trying to fix the device on their own.
When it comes to this, they can contact the support team for DeWalt. You will then be connected with an agent that should help you in getting rid of the problem.
If the parts have to be fixed or replaced, then the team will ask you to bring the device to them. They will then get it repaired for you within a few working days.
You can also get free replacements if your Finish nailer is still under warranty. But if you are thinking about claiming this service, then make sure that you go through the guidelines once.
- Jamming Issues
The issues with the jammed fasteners are just as common, where you will not be able to get the desired response from the system.
Most of the time, this issue is caused by the usage of the wrong size fasteners from the owners. So, you might also be in the same situation.
The only thing that you can do to fix these issues is to rely on a recommended fastener to get through the fix.
That will be more than enough to help you through these errors, and you will not have to bother with the same situation.
However, there might also be other problems at play here. You need to always check the system for debris. This includes the nozzle and the magazine.
A quick cleaning cycle will be more than enough to help you get through the clogging issues.
You can rely on a can of compressed air. From there, you can simply blast the nozzle as well as the magazine to get through these errors.
There is no point in relying on any other fix as you’re struggling with these complications.
Hopefully, you will have a better understanding of how to maneuver through this complication with the system not responding to your input.
Be sure to also check for damaged driver balance as well as the charging levels here.
- Driver Blade Stuck Down
This issue with the Finish Nailer is more complicated than you might think and mostly points toward hardware issues.
However, before you jump to conclusions, try to figure out other errors that might play into the same situation.
We all know that the situation around the workshop can get a bit demanding at times.
You should always approach the troubleshooting routine with a quick maintenance cycle and that will address ninety percent of the issues here.
However, if you’re not that lucky, then the driver blade might be worn.
The only way to fix this issue is to get a new one, and there are no quick methods. While some owners try to force the driver blade into place, that is not a long term solution.
You should think more in terms of finding the right replacement from the local hardware store.
On the other hand, if you get a damaged unit from the dealer. There is no point in struggling with any of these errors.
You should reach out to the dealer immediately and ask him to help you with a fresh piece. There is no gain in struggling with the system, as you might end up voiding the warranty.
For this reason, we suggest that you let the dealer take charge of this situation and you will have the new unit within the same week.
From there, fixing the device will come easy to you, and you will not have to bother with the same errors.
Wrapping Up
Keeping your devices in perfect condition is a hard thing to do, and you will likely run into issues with the DeWalt Finish nailer not working when you ignore the maintenance.
Luckily, this DeWalt Finish Nailer Troubleshooting guide should help you figure out the solution with ease.
It will take only a bit of effort on your end to find the right solution. Once you’re sure about what exactly is wrong with the system, fixing it will come easy to you.
However, if you’re unsure about the system, then fixing it can be pretty challenging at times.
For this reason, we will always suggest that you seek help from a professional. Going at the fix on your own will only lead to wastage and further damage as you try to set up the system.
So, you should instead seek help from a professional that will help you speed through these fixes.
Isolating the issue is not the easiest job, and there is no shame in seeking professional support.
These experts will make sure that you will not have to deal with the same errors down the road. It all comes down to how you’re planning on addressing the situation with the unit not working.