Milwaukee is another well-known brand that helps you get the best of durability and performance at the same place.
You will never have to extend your budget either while you are working with the Milwaukee tools.
The best thing about Milwaukee tools is that they offer you a wide range of inventory at the same time.
They are also manufacturing some other Jobsite equipment and devices, such as M18 radio with a rugged body and all the features that you can possibly need, including Bluetooth and FM.
Milwaukee M18 Radio Charger Not Working
However, if the radio charger is not working, it could be problematic, and here is how you can solve it.
- Check The Compatibility
The m18 Jobsite radio is pretty great to have, and you will not be getting any problems with it. It also comes with a battery pack that you can charge.
At times you might mix it with some other charger, and that could cause you to have problems that your charger might not work.
So, you will need to ensure that you are checking if the charger that you are using is compatible with the Milwaukee M18 radio.
That should help you out to solve any such problems that you might have been possibly facing on the radio while getting it charged.
- Batteries Deeply Discharged
Another issue that you will have to face with the charger not working is your batteries being deeply discharged, and that is something you will need to be careful about.
You should never let your batteries be discharged below a certain level. If they are deeply discharged, you will need to give your charger and batteries a bit of time.
This is to ensure that they are able to level up the voltage level on your batteries and once that is done, your charger will be able to work again.
- Check Terminals
You will also need to be particularly careful about the terminals that you have on your DeWalt battery charger since they play a major role in charging your batteries.
If the terminals are bent and they are not able to properly connect with your battery terminals. As a result, your battery will not be charging as it should.
So, straightening out the terminals will ensure you get rid of any such problems that you might have been facing.
Afterward, you will also need to ensure that you are checking the charger for any signs of corrosion.
You should be getting it cleaned up properly to make your Milwaukee M18 charger work again in the right manner.
- Check Charger
Lastly, there is also a possibility that your charger might have developed some fault on it, or there could be some other malfunction that you need to be careful about.
So, you will need to have that fixed up properly by getting the charger checked up, and that will help you to make your charger work again.
- Check the Voltage
The voltage from the main source can also create the same problems. It is not always your charger, and you need to isolate the issue from the main power source.
To do that, you will need to rely on some voltage-measuring devices like a voltmeter or a multimeter.
Both devices are great to help you through minor issues with the unit voltage. So, if you’ve not been able to fix the minor errors with the charger, just check the voltage.
You can’t expect the unit to perform when the power supply to the device is not optimal.
So, if you’re in this situation, and the power output is below the recommended limit, then call an electrician.
This issue was more common for users that don’t get their electrical connections fixed, and you’re likely in the same boat.
It is a good idea to get the electrical connections checked every six months. Any longer than that, you will risk fire hazards and the longevity of your electrical devices.
So, be sure to hire an expert to help you with voltage errors. From there, you can test out the response through the charger.
It should work perfectly with the battery without causing any more complications.
- Fix Installation
The installation of the battery might also be to blame here. Even if the batteries are compatible, you have to make sure that the pack is tightly fitted into the compartment.
Loose connections are never good when you’re trying to charge the battery. So, try removing the battery completely from the system and installing them one more time.
Make sure that the terminals are engaged properly, and that there are no vacant spaces in between.
This won’t only help with the charging errors, but you will also notice a better uptime from the battery.
There is no harm in using an air blower to help with the servicing of the charger.
This would help you remove the clogged gunk from the terminals, and you might just be able to charge the battery at this stage.
- Jump The Battery
Another thing that you need to keep in mind is that the battery should never go below the 10 percent charge status.
Otherwise, you won’t be able to get the charger to pick up the battery as you place it on the unit.
So, if you’ve made the mistake of completely draining out the battery, just jump the battery with a different one.
You need to grab a pair of wires along with fresh batteries to jump the old one. Connect the respective terminals of both batteries with each other for around 20 minutes.
Some people prefer to leave the batteries connected for an hour. You can follow the same. Once the hour has passed, just grab the battery and place it on the charger.
This time around, you need to make sure that the battery never goes below the 20 percent charging status.
Otherwise, you will keep running into the same complications as you jump through the system.
- Find A New Battery
At this point, there is a good chance that the battery is defective. There is no point in wasting your time with a defective battery, and you will have to get a fresh piece.
The new battery is not that expensive and will only set you back a few bucks.
Sooner or later, you will have to get a replacement, and there is no way around it. So, instead of wasting more of your time, make the smarter decision, and get a fresh piece.
- Contact Support
The customer support is also pretty diligent when it comes to the Milwaukee systems. These professionals work round the clock to help customers through any and all issues.
So, if you’ve not been able to isolate the issue with the unit and the charging is still not working, try reaching out.
It will take a few hours to secure a response from these professionals. You just have to explain the situation with the charger, and they will guide you through the rest.
Once the issue has been isolated, it won’t take long to fix the problem. So, be sure to reach out to these professionals.
If the unit is defective, you can get a replacement here. Just provide the professionals with proof of purchase, and they will dispatch a new unit in four to five working days.
After that, you won’t have to worry about charging issues.
Wrapping Up
Most of the time, you’ll have an amazing experience with the Milwaukee M18 system. Issues with the battery not charging can present themselves every now and then.
You can isolate these issues pretty easily by going through the basic fixes mentioned here.
However, if you’re unlucky and the unit is damaged, getting a replacement is the only viable option.
It all comes down to the basic condition of the charger as well as the battery. So, be sure to reach out to the dealer if any of the components are defective.
If your claim is valid, it shouldn’t be too hard to get a fresh piece from these professionals!