The Metabo HPT miter saw is a powerful tool that is capable of outputting a stable 5000 RPM. This is more than enough to slice through most objects without any worries. Though, people can also alter the speed at which their blade is rotating by accessing its slider. This allows users to switch between different speed settings depending on the materials they are working with. With that being said, another important thing that you should note is that the blades on your miter saw also play a huge role in its performance.
When it comes to this, some people have reported that they are having trouble trying to change the blades. If you are getting the same problem, then going through this article should help you in understanding how this can be done. This is because we will be teaching you how to change the blade on your Metabo HPT miter saw using a small guide.
How To Change Blade On Metabo HPT Miter Saw?
Before changing the blade, people should understand that the process required for it has recently been changed. This might be the main reason why you are having so much trouble with your tool. Instead of requiring a key to unlock the chuck, the HPT miter saw now requires no additional tools. Keeping this in mind, you can start following the guide mentioned below to change your blades.
- The first and most important step is switching off your power tool and then removing its battery. This allows the current inside your tool to escape so that there are no issues later on.
- You can then start accessing the side of your power tool and behind the configuration’s slider, there should be a small pin. This can be pulled out from the miter saw easily to expose its lever.
- People can then start rotating the lever and it should slowly release the tooth holding your saw blade. Once these are released; the blade should fall out of your HPT Metabo miter saw.
- Finally, users can start installing the new blade inside their miter saw but it is recommended that you clean the chuck system before it. This is because small debris might be gathering inside the tool that can clog its connection.
- After you have placed the new blade inside, rotate the lever anticlockwise to lock it. Make sure that this is tightly locked after which you can push the pin back inside.
The steps mentioned above are more than enough to change the blade on your Metabo HPT miter saw. Though, if you still have any questions in mind then contact the support team for this brand. They should be able to help you out and even provide you with replacement parts if required.
Keep in mind that the pin might sometimes get stuck when trying to pull it. People can easily fix this by using lubricants or applying additional force. However, it is still best that you don’t force the pin out as this can also break and cause more problems.