The miter saw from Bosch has recently been gaining a lot of popularity. This is because the tool comes with unique features that allow it to last a long time. These include having a powerful motor that is capable of slicing through most objects. Additionally, the versatility of changing the speed settings on your device whenever you want to. People can also adjust the depth of the blade and change it according to the materials they are working with.
You can check the manual provided along with your tool for a list of all the features on the device along with steps on how these can be used. While the power tool is amazing, there are also some issues that you can run into with it. This is why we will be using this article to provide you with some troubleshooting steps for the Bosch miter saw. Going through them should help you in understanding how the problems can be fixed.
Bosch Miter Saw Troubleshooting
- Bevel Is Stuck
The most common issue reported with the miter saw is that its bevel gets stuck. If you are running into this problem, then keep in mind that the bevel not moving is usually from a feature on the tool. Before you can access the device and start using it, people have to first release the lock on the bevel.
This can be done by pulling out the detent pin inside the retainer and then rotating it. The process allows the pin to say out and keep the bevel unlocked. If you are still getting the same issue, then changing the range of knobs on your device might be required. Set this to a position where the bevel can move around easily without any limitations.
- Miter Saw Cutting At Wrong Angles
Sometimes while working on your projects, people might notice that the miter saw is cutting materials at the wrong angle. If this happens then users might think that they have to place their materials in a different position. However, the problem is actually from the adjustments on your power tool.
The angle at which the miter saw cuts can be changed by accessing its features. There is a wide range that you can select from and that will determine how the cuts are made. If set properly then you should be able to make cuts at your desired angles. Consult the manual provided along the product for details about the feature.
- Blade Getting Stuck
People often complain that their power tool is not cutting smoothly or the blade on it gets stuck. When it comes to this, several things need to be kept in check. The first one includes the blade you are using on your miter saw. This might not be supported by the materials you are working with, so you should swap it out. Alternatively, the blade might have gotten dull and has to be replaced with a new one. Other than this, the way you handle the device also plays a huge role in the cuts made by it.